Accessories

7.5 HP pump controller, SmartBox single phase with 24 VAC contactor coil. Includes voltage & HP specific thermal protection for the motor and a terminal block. Includes pressure switch for mounting to pump discharge.

Pump start and protection in ...

HydroCheck Hi-Lo Pump Switches are "electronic float" switches that are designed to work in sump pits. They are particularly useful when the sump pit is very large and may take more than 90 seconds to empty, or the water table is unusually high an...

Electric Flow Controller or water well / booster pump flow switch. 22PSI

When the pressure available is insufficient it is necessary to install a boosting system. TOTAL CONTROL electronic pump controller starts and stops the water pump according ...

Deluxe Controller: Deluxe controller with Vertical Float Switch

The Controller monitors pump and power conditions, and sounds an alarm when a problem is detected. The warning signals are described below. In addition,it begins the pumping cycle wh...

Enhanced Float Controller VSC1.5 has all of the features and benefits of the VSC1 plus several features only previously available on the VSC2, making for a great upgrade. With the universal mounting tabs, the Enhanced Float Controller is easy to i...

SJE Vertical Master Pump Level Switch 115v.

Mechanically-activated switch designed for direct control of pumps up to 1/2 HP at 120 VAC and 1 HP at 115 VAC. 20VM1WP

This mechanically-activated pump switch is designed to operate in non-potable wat...

Mechanically-activated switch designed for direct control of pumps up to 1 HP at 240 VAC/1. 20VM2WP

This mechanically-activated pump switch is designed to operate in non-potable water and sewage applications...

The all new Enhanced Float Controller DFC1.5 has all of the features and benefits of the DFC1 plus several features only previously available on the DFC2, making for a great upgrade. With the universal mounting tabs, the Enhanced Float Controller ...