My Cart


OUT OF STOCK Electronic Sump Pump switch 115v
Model Number
Z24800A1Z Level Switch
LevelGuard pump switch

LevelGuard™ Home Sump Pump Control level switch introduces solid-state Field-Effect sensing technology to the pump and plumbing industries. LevelGuard Home Sump Controls use Field-Effect technology to detect the presence of water in residential sump pits without making direct contact with the fluid. The LevelGuard Home Sump Control is used to "turn-on" and "turn-off" (6" range) a residential sump pump with more reliable performance than the mechanical float switches they are designed to replace.

Never Flood Again!

Just plug any pump's power cord into LevelGuard outlet and get the most dependable and advanced electronic pump operation available. 5 yr warranty. Unit plugs into standard household outlet. Universal replacement of all types of sump pump water level controls. Upgrade manual pumps to automatic. Use as a alarm in critical areas. Three prong plug, 110v, 15 amp rating. Patented Field-Effect sensing technology are Underwriters Laboratories listed. The switch has a warranty of five (5) years against manufacturer's defects. .

Elevator Sump Pump Controls and pumps benefit from the switches simple but effective technology. Also can be used in transformer containment barriers, underground vaults, anywhere you need to pump water and not oil in commercial applications. Z24802PTZ

Use to keep your Basement Dry.

  • Adjustable "Pump Out" or OFF Level based location, 10" differential. Operating temperature rangesAmbient 32° - 122°F (0° - 50°C)Liquid 32° - 122°F (0° - 50°C)Storage -40° - 185°F (-40° - 85°C)
  • Can be used to turn off a pump and prevent dry running
  • Redundant upper limit sensors for “fail-safe” reliability
  • Tested to over 3 million cycles
  • Solid-state electronic design for non-sewage applications
  • Corrosion-proof sensor
  • 9 FT power cord with plug
  • 12 amp contact rating or up to 1/2HP
  • Works with any dirty water
  • No floats to get stuck - No tools required
  • OUTLASTS FLOAT SWITCHES. Beats conventional switches 7 to 1 in comparative testing. 5 year warranty.
  • Plug-and-Play (Dim's 9 x 2.2 x 1")

Field-Effect's low-power electric field has the unique ability to detect conductive fluids (for example, water) without having direct contact. When water enters the LevelGuard field, the sensor detects its presence, determines its state, and activates the pump if needed. Other level switches.

LIVE cycle test --over 6 million cycles and counting!--

More Information
Model Number Z24800A1Z Level Switch
Series Flood Free Electronic Level Control Pumps
Horse Power (HP) 1/2
Horsepower (IE .5, 1, 1.5, 20) 0.5
Watts 1440.000000
Wetted Materials ABS
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Self Priming ----
Max Operating Temperature (F) 122
Viscosity Water 1.00 cp 31.00 ssu
Other Needs only 2" clearance from face of unit to operate. SJTOW/14 Gauge power cord with standard 3-prong ground plug. SAFETY PROTECTION. Includes fused over-current protection against pump electrical failure.

Pump Switch, Tether, Solid State, Normally Open, Plug Connection, Max. Amps Running 12, HP @ 1 Phase - 115V 0.5, Voltage 115, Wire Gauge 14, Pumping Range Min./Max. 6, Length 105.5, Width 2.25, Height 9..5, VA Rating 1440, Operation Electronic, Vertical, For Use With 1/2 HP And Under Submersible Sump Pumps, 120 V, 60hz, Single Phase Only, Body Material ABS Plastic, Max. Voltage 120, Max. Wattage 1176

Approvals UL
Cord Size 14
Cord Length (Ft.) 9
Country of Manufacture United States
Weight (Lbs) 3.000000
Warranty (YRS.) 5

Supporting Docs

Supporting Docs
(Size: 943.17 KB) Extension: pdf
(Size: 330.76 KB) Extension: pdf
(Size: 28.59 KB) Extension: jpg
(Size: 27.55 KB) Extension: jpg
(Size: 27.01 KB) Extension: jpg