Gear Pumps
Gear pumps, or rotary gear pumps,
are positive displacement (or fixed displacement), meaning they pump a constant amount of fluid for each revolution. Hypro, Oberdorfer gear pumps come in Cast Iron,Stainless Gear pump and Bronze. These pumps are for thick / high viscousity to water like liquids.
Sizes of our gear pumps range from 1/4" - 2" in size and are available with electric motors or bearing pedestal mount for local drive units.
Gear pumps have limited self priming abilities and should not run dry or handle any abrasives. The electric motors come in single or three phase along with Explosion proof.
Used for pumping oils, soaps, fuel and chemicals. Gear pumps are capable of high pressure but at low flow rates. The size of the electric motor depends directly to the output pressure. Flow is generally steady and no pulsation.
-
Hypro Pumps
12V DC Cast Iron Gear pump
GMCV4VA-12
$1,253.0012 volt 12v DC Rotary Cast Iron Gear pump. 303 SS fasteners, steel gears. Battery powered self priming heavy duty gear pump.
Adjustable relief valve designed for internal pressure relief, can be ported for either internal or external discharge. D...
12vdc 1HP Learn More -
Graco Pumps
EGP Transfer Pump 12v
25T819
$1,700.00Choose cost-saving convenience with the all-new Graco EGP electric pumps. Attach the EGP transfer pump directly to roll-around barrels for more mobility in more places. These pumps offer the same powerful, high-quality performance you’ve come to...
12VDC Learn More -
Hypro Pumps
316SS Gear pump
GMSV4A53
$2,048.36316SS Rotary Gear pump. Ryton gears. Stainless steel gear pump for aggressive chemicals.
Use for pressure spraying, circulation of lubricants, tank / drum filling. Will handle water like liquids to very thick. Bi-rotational allows for flow direct...
3/4HP 230/460v , 1/2" Learn More -
Graco Pumps
EGP Transfer Pump 115v
25T820
$850.00EGP™ Transfer Pump, 115 VAC, 3.9 gpm (14.8 lpm), 65 psi (4.5 bar)
Choose cost-saving convenience with the all-new Graco EGP electric pumps. Attach the EGP transfer pump directly to roll-around barrels for more mobility in more places. These pum...
115vAC Learn More -
Oberdorfer Pumps
2" Bronze gear pump
N26HDM
$6,488.30Long coupled gear pump made of cast bronze. If used above 900 RPM with non-lubricating fluid, then duty cycle is limited to intermittent.Continuous duty on lubricating liquids like oils. Use slower speed motor at lower flow rates for water an...
up to 170GPM Learn More -
Oberdorfer Pumps
Close Coupled Bronze Rotary Gear Pump
N999Q-F09
$1,311.70Features N999 Series:
- Compact design eases installation and use in limited space areas.
- Construction is bronze and stainless steel wetted components.
- Close tolerance design allows for consistent performance
- Helical gears for quiet operatio...
-
Hypro Pumps
CI gear pump 11 gpm
C4V
$1,493.6911 GPM Cast iron pedestal mounted gear pump. For oils and other lubricating liquids. Not for use on water. Vellumoid Gasket Material, FKM Lip Seal -
Oberdorfer Pumps
3/4" Bronze gear pump 1HP
N970H-N47
$4,637.183/4" Bronze rotary gear pump without relief valve and close coupled to a 1 HP 115v/1/60 1725 RPM TEFC motor.Pump housings and gears are made of top quality bronze, shafts are stainless steel 303. Bearings are made of high performance carbon-gra...115/230v ODP 1HP Learn More -
Oberdorfer Pumps
3/4" Bronze gear pump 3/4HP
N970H-M46
$1,597.703/4" Bronze rotary gear pump with relief valve and close coupled to a 3/4 HP 115v/1/60 1150 RPM TEFC motor. Shaft speed and flow are directly proportional. Motor HP needs to increase with a increase in pump pressure. The nature of a positive disp... -
Hypro Pumps
Bronze Gear pump 1/2 hp
GCBN33V
Call For PriceBronze Gear pump close coupled to a 1/2 hp Carbonator type motor. Bronze spur gears with 304 stainless steel shaft and carbon/graphite shaft supports. Standard pressure relief valves that can be ported internally or externallyand adjusted.She...
3/8" 115v This Pump is no longer available. Please call us for possible alternatives Learn More
