Tsurumi Submersible Sand Trash Pump HS3.75S-61

Model Number:

HS3.75S-62
Product Name:

Tsurumi Submersible Sand Trash Pump HS3.75S-61
Manufacturer:

Tsurumi
Series (8 Models):

HS Sand / Solids Submersible Trash Pump

1HP 115v

Model Number

HS3.75S-62

$783.00

Email to a Friend Price Match

Skip to the beginning of the images gallery

Tsurumi HS3.75S-62

Tsurumi HS3.75S-62 3" Submersible Sand & Solids Pump – 1 HP, 115V, 3"

The Tsurumi HS3.75S-62 is a compact submersible pump with a built-in agitator for dewatering sandy, silty and dirty water. With a 1 HP motor, 3-inch discharge and ductile cast iron casing, it handles heavier-duty sandy dewatering.

WHAT IT'S GOOD FOR
• Construction and rental dewatering where water carries sand or silt
• Residential, commercial and industrial wastewater and site drainage
• Sediment removal from small sumps or basins
• Raw water supply from lakes or rivers

KEY FEATURES
• Built-in agitator stirs up settled sand and sediment so it is pumped out instead of clogging the pump
• Urethane semi-vortex impeller and wear plates resist abrasion
• Dual inside mechanical seals with silicon carbide faces, kept lubricated by Tsurumi's patented oil lifter
• Built-in thermal protection guards against overloading and accidental run-dry
• Permanently lubricated C3 ball bearings rated for a 60,000-hour B-10 life

SPECIFICATIONS
Horsepower: 1 HP
Power: 115V, single-phase, 60 Hz
Full-load amps: 9.7 A at 115V
Discharge: 3" straight male NPT
Max flow: 60 GPM (3,600 GPH)
Max head: 60 ft
Max solids: 0.276"
Power cable: 32 ft
Operation: Manual
Max water temperature: 104°F (40°C)

Backed by Tsurumi's limited warranty: two years.

Order float control if needed as accessory. DFC1.5

More Information
Model Number	HS3.75S-62
Series	HS Sand / Solids Submersible Trash Pump
Max Flow (GPM.)	60
Max Flow GPH	3600
TDH Maximum (Ft)	60
TDH Maximum (PSI)	26
Horse Power (HP)	1
Horsepower (IE .5, 1, 1.5, 20)	1.0000
Outlet Connection Type	MNPT
Outlet (In.)	3
Wetted Materials	304SS, Epoxy coated
Elastomers / O-ring	Urethane
Voltage (V)	115
Voltage (Range)	110-120
Phase (Ø)	Single (1)
Motor Frequency	60
Motor Amps (A)	9.6
Motor	Hermetically Sealed
Speed (RPM.)	3450
Max Operating Temperature (F)	180
Max Particle Size (In)	.37
Viscosity	Milk 3.20 cp 40.00 ssu
Length (In.)	13.000000
Mechanical Seal Face	SiC
Mechanical Seal Type	Double
Motor Bearings	Ball
Other	Max. Diameter (inch) : 12-1/2", Max. Height (inch): 15-1/4". Continuous Running Water Level (inch): 3 1/2. ETL Certified to UL CSA standards for submersible construction pumps. Double shielded, permanently lubricated, high-temp C3 with B-10 life of 60,000 hours. Min. generator size 1300 Watts. Starting current 37A.
Approvals	ETL
Impeller Material	Urethane coated steel, Semi Vortex
Cord Size	14/3
Cord Length (Ft.)	32
Motor Insulation	B
Duty	Continuous
Port Rotation	Yes
Country of Manufacture	Japan
Weight (Lbs)	36.000000
Warranty (YRS.)	2
GPM Of Water At 15 Feet Of Head	55
GPM Of Water At 25 Feet Of Head	50
GPM Of Water At 30 Feet Of Head	47
GPM Of Water At 40 Feet Of Head	35
GPM Of Water At 50 Feet Of Head	20

As a pioneer in the submersible pumps, Tsurumi Pump is contributing to the people all over the world by supplying the products that always support people’s lives such as submersible pumps for wastewater and construction, centrifugal pumps, vacuum pumps, and water treatment equipment, etc. and also by offering technologies that control and protect water.