Tsurumi Submersible Sand Pump Automatic

Model Number:

HSZ3.75S-62
Product Name:

Tsurumi Submersible Sand Pump Automatic
Manufacturer:

Tsurumi
Series (8 Models):

HS Sand / Solids Submersible Trash Pump

Submersible trash pump 1HP 115 or 230v

Model Number

HSZ3.75S-62

15% Off Special Price $617.95 Regular Price $727.00

Email to a Friend Price Match

Skip to the beginning of the images gallery

Tsurumi HSZ3.75S-62

Tsurumi HSZ3.75S-62 Automatic 3" Submersible Sand & Solids Pump – 1 HP, 115V, 3"

The Tsurumi HSZ3.75S-62 is a compact submersible pump with a built-in agitator for dewatering sandy, silty and dirty water. An attached float switch runs it automatically for unattended sump and pit duty.

WHAT IT'S GOOD FOR
• Construction and rental dewatering where water carries sand or silt
• Residential, commercial and industrial wastewater and site drainage
• Sediment removal from small sumps or basins
• Raw water supply from lakes or rivers

KEY FEATURES
• Float switch for automatic, hands-free operation
• Built-in agitator stirs up settled sand and sediment so it is pumped out instead of clogging the pump
• Urethane semi-vortex impeller and wear plates resist abrasion
• Dual inside mechanical seals with silicon carbide faces, kept lubricated by Tsurumi's patented oil lifter
• Built-in thermal protection guards against overloading and accidental run-dry
• Permanently lubricated C3 ball bearings rated for a 60,000-hour B-10 life

SPECIFICATIONS
Horsepower: 1 HP
Power: 115V, single-phase, 60 Hz
Full-load amps: 9.7 A at 115V
Discharge: 3" angled male NPT
Max flow: 60 GPM (3,600 GPH)
Max head: 60 ft
Max solids: 0.276"
Power cable: 32 ft
Operation: Automatic (float switch)
Weight: 43 lb
Max water temperature: 104°F (40°C)

Backed by Tsurumi's limited warranty: two years.

More Information
Model Number	HSZ3.75S-62
Series	HS Sand / Solids Submersible Trash Pump
Max Flow (GPM.)	60
Max Flow GPH	3600
TDH Maximum (Ft)	60
TDH Maximum (PSI)	26
Horse Power (HP)	1
Horsepower (IE .5, 1, 1.5, 20)	1.0000
Outlet Connection Type	MNPT
Outlet (In.)	3
Wetted Materials	304SS, Epoxy coated
Elastomers / O-ring	Urethane
Voltage (V)	115
Voltage (Range)	110-120
Phase (Ø)	Single (1)
Motor Frequency	60
Motor Amps (A)	9.6
Motor	Hermetically Sealed
Speed (RPM.)	3450
Max Operating Temperature (F)	180
Max Particle Size (In)	.37
Viscosity	Milk 3.20 cp 40.00 ssu
Length (In.)	13.000000
Mechanical Seal Face	SiC
Mechanical Seal Type	Double
Motor Bearings	Ball
Other	Max. Diameter (inch) : 12-1/2", Max. Height (inch): 15-1/4". Continuous Running Water Level (inch): 3 1/2 ETL Certified to UL CSA standards for submersible construction pumps. Double shielded, permanently lubricated, high-temp C3 with B-10 life of 60,000 hours. Min. generator size 1300 Watts.
Approvals	ETL
Impeller Material	Urathane, semi-open
Cord Size	14/3
Cord Length (Ft.)	32
Duty	Continuous
Country of Manufacture	Japan
Weight (Lbs)	35.000000
Warranty (YRS.)	2
GPM Of Water At 25 Feet Of Head	50
GPM Of Water At 30 Feet Of Head	47
GPM Of Water At 40 Feet Of Head	37
GPM Of Water At 50 Feet Of Head	20

As a pioneer in the submersible pumps, Tsurumi Pump is contributing to the people all over the world by supplying the products that always support people’s lives such as submersible pumps for wastewater and construction, centrifugal pumps, vacuum pumps, and water treatment equipment, etc. and also by offering technologies that control and protect water.