Submersible Dewatering Pump Heavy Duty
-
Model Number:
PBX-65011
-
Product Name:Submersible Dewatering Pump Heavy Duty
-
Manufacturer:
-
Series (13 Models):
115/110v 4870GPH 2" 1/2HP
Model Number
PBX-65011
$503.80
Koshin PBX-65011
2" 1/2HP Heavy duty submersible dewatering pump. Electric pump for dirty water in ditches. Often found in rental shops, contractor fleets. Industrial Rubber Pump End Pumps, Equipped With a Centrifugal Switch Providing 4x the Starting torque, Allows Cooler Operation when Cycling Equipped with Air Valves for Periods of Dry Run.Avoid the Piggy Back Integrated Float Switch Connector. Just Two Bolts Outlet Can be Turned to Pump Horizontally. Perfect for Industrial, Construction, Fountains, Ponds, Pools, Irrigation, Agriculture, and Flood Prevention. Replaces PB-65011
Features
- Impeller and casing are manufactured from a blended rubber compound providing maximum wear resistance, up to three times over cast iron.
- Water is channeled through the outer wall to cool the motor for maximum endurance.
- It is compact, light-weight, easy to carry and handle.
- Double Silicon Carbide mechanical seals run in an "oil" filled chamber of liquid paraffin to prevent damage from periods of dry running.
- Liquid paraffin is used in the shaft seal, therefore water will not be contaminated even in the case of oil leakage.
- The cord is 33' of uni-body construction ensuring excellent water tightness. Includes heavy duty mechanical strain relief bracket.
- The built-in thermal protector turns off the power supply in case of overload operation thus protecting the motor.
- Discharge port can be positioned vertical OR horizontal. Also it is replaceable. MNPT
- Optional Integral float switch for automatic operation available: PN FS-PBX (order separately) see below
- Applications: Construction site, excavations, well casings and general dewatering.
- Utilities, manhole and vault draining, loading docks.
- Residential, draining of basements, crawl spaces and swimming pools.
- Pumps down to a couple of inches.
- Fits into 8" diameter holes
| Model Number | PBX-65011 |
|---|---|
| Series | Submersible Dewatering Pumps Heavy duty |
| Max Flow (GPM.) | 81 |
| Max Flow GPH | 4860 |
| TDH Maximum (Ft) | 32 |
| Horse Power (HP) | 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | .5 |
| Watts | 400.000000 |
| Outlet Connection Type | MNPT |
| Outlet (In.) | 2 |
| Wetted Materials | Aluminum |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor Amps (A) | 8.7 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 1725 |
| Max Operating Temperature (F) | 104 |
| Max Particle Size (In) | 0.1200 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Stages | 1 |
| Shaft | 304SS |
| Length (In.) | 16 |
| Mechanical Seal | Yes |
| Mechanical Seal Face | SiC |
| Mechanical Seal Type | Double |
| Motor Bearings | Ball |
| Other | 7-1/2" diameter. Pump requires minimum hole size of 7-3/4" diameter. Motor is thermally protected. Contact PumpBiz for level switches, starter boxes and other options. Min. Generator capacity 4000 watts. |
| Impeller Material | Hard rubber, semi-open |
| Cord Length (Ft.) | 33 |
| Duty | Continuous |
| Country of Manufacture | Japan |
| Weight (Lbs) | 36.000000 |
| Warranty (YRS.) | 3 |
| GPM Of Water At 10 Feet Of Head | 60 |
| GPM Of Water At 20 Feet Of Head | 40 |
>
Koshin pumps are the standard and known world wide in the contractor, rental, and portable pump markets as the brand to use. Most portable water pumps by Koshin feature Honda gas engines. Koshin manufactures a complete line of self priming centrifugal pumps for general transfer, high pressure and trash debris filled liquids. These pumps come in gas or diesel engine and single phase electric submersibles. Koshin is the most copied pump design coming out of China, but do not think they are the same. Use only the best, the original Koshin.
For over 70 years Koshin has continued to invest in new product testing and development. Koshin totally redesigned its production facilities in 2013 adding in house aluminum die casting, production automation, and state of the art process flow management. With a core philosophy of customer satisfaction, Koshin insures that each product off of its production line is of the finest quality. This is why we can proudly say that the performance specification found in this catalog are guaranteed minimum. This is often not the case with our competitors, who inflate actual performance values.
To further insure our valued customers that Koshin stands by our produces, we offer a 3 year limited warranty against manufactured defects. Our pumps are used and loved in 160 all over the world.
Koshin… the world’s toughest pump.
You May Be Interested In
