Floor Flood Protection Kit DFC1

1/6 Submersible sump/utility pump with cast aluminum housing, plastic base, bottom sump-type pick-up with removable plastic screen. Flat surface sump pump. Includes DFC1 switch for quick and easy automatic LOW level floor flood control or dewatering a flooded basement. Submersible Utility Pump 115V, Manual or automatic, 25' Power Cord. The pump with a 101 uses. High flow rate and pressure. Connects to 1" pipe or garden hose. Screened inlet, carry handle and epoxy coated aluminum housing. Great for emptying spa, small pool, bathtub, window wells, flat roofs, sink drain and elevator pits. Wash pit sump pump for mobile pressure washing. Use fully or partially submerged. For sucker floor pump with a 25 ft. power cord see 505025 5-MSP.

Unique DFC1 switch, The Dual Float and Controller is for any manual pump. It turns on the pump when water lifts the float switch 1/4", and runs the pump for an additional 10 seconds after the float drops, to completely empty the sump pit once the float returns to its original position. Set the switch housing at any height to get a corresponding On / Off level. For further peace of mind the switch has a Dual float which acts as a backup to the main lower float should it get stuck the second one takes over. Industrial strength electronics, 30 amp relay means extended life compared to ordinary float switch. ON level point is 3/4" from its bottom surface. Then it will pump down to approx. 1/8" of surface.