Demand diaphragm pump
-
Model Number:
5512-1F02-J526
-
Product Name:Demand diaphragm pump
-
Manufacturer:
-
Series (21 Models):
4gpm or 70psi
Model Number
5512-1F02-J526
$199.00
Aquatec 5512-1F02-J526
550 Series Super Flow Pump: Water system, wash down, watering.
Reverse Osmosis System Pump, High Powered RO / DI Reverse Osmosis
Pump
OPERATION: The 550 pumps can draw water from a holding tank and pressurizeit, or boost the pressure from a low pressure source. It is designed to operate intermittently, but most versions can run continuously for several hour intervals.It can be operated in demand mode controlled by an integral pressure switch. Keep hose runs short or at least 3/4" in diameter so that friction loss (psi) does not build up and turn pump off. POWER: The power demand varies depending on flow and pressure from 50W to 200W. Motors are available in various configurations from 115V, 12 VDC to 230 VAC. Transformersor DC power supplies are optional and must be ordered separately if applicable. MOUNTING: A steel mounting base with four hollow rubber grommets is standard and includedat no extra cost. The pump may be mounted in any position. FITTINGS: The standard pump head has 1/2 NPT female ports. Includes 6FT power cord and plug.The pump can be ordered with a .750" port opening that accepts "quick connect" beverage style O-ring barb fittings, for use with 5/8" (16 mm) ID tubing. See model designation
*Geolast- nitrile based thermoplastic elastimer used in place of nitrile (Buna-N) or neoprene for non-aggressive water-based applications *Santoprene- EPDM-based thermoplastic elastimer and is resistant to mild acids, some solvents and bases
Click here for strainers.
Model Number | 5512-1F02-J526 |
---|---|
Series | Demand Pump Electric Diaphragm 550 |
Max Flow (GPM.) | 4 |
Max Flow GPH | 240 |
TDH Maximum (Ft) | 161 |
TDH Maximum (PSI) | 70 |
Inlet Connection Type | FNPT |
inlet size | Less than 1" |
Inlet (In.) | 0.5 |
Outlet Connection Type | FNPT |
Outlet (In.) | 0.5 |
Wetted Materials | PolyPro-GF |
Elastomers / O-ring | EPDM |
Diaphragm | Santoprene |
Voltage (V) | 115 |
Voltage (Range) | 110-120 |
Phase (Ø) | Single (1) |
Motor Frequency | 60 |
Motor | TENV |
Self Priming | Yes |
Suction Lift (FT.) | 10 |
Max Operating Temperature (F) | 145 |
Viscosity | SAE 30 oil 352.00 cp 2000.00 ssu |
Length (In.) | 9.000000 |
Mechanical Seal | No |
Other | Pressure switch is adjustable within certain range 70 psi. Motor is a permanent magnet - brush type with ball bearings. If used at hign end of pressure range, use for time periods <40 minutes. See temperature performance curve. |
Cord Length (Ft.) | 6 |
Duty | Interm. |
Drain | No |
Port Rotation | No |
Country of Manufacture | United States |
Weight (Lbs) | 6.000000 |
Warranty (YRS.) | 1 |