5 chamber diaphragm pump
-
Model Number:
5501-1E12-B526
-
Product Name:5 chamber diaphragm pump
-
Manufacturer:
-
Series (21 Models):
3GPM 60psi 115v
Model Number
5501-1E12-B526
$199.00
Aquatec 5501-1E12-B526
Demand Pump: Reverse Osmosis System Pump, High Powered RO / DI
Reverse Osmosis Pump
OPERATION: The 550 pumps can draw water from a holding tank and pressurizeit, or boost the pressure from a low pressure source. It is designed to operate intermittently, but most versions can run continuously for several hour intervals.It can be operated in demand mode controlled by an integral pressure switch,or in delivery mode controlled by an external power switching device. POWER: The power demand varies depending on flow and pressure from 50W to 200W. This pumps Standard termination are 12" Long 14 AWG lead wires with a stripped end,cords with plugs are Optional. MOUNTING: A steel mounting base with four hollow rubber grommets is standard and includedat no extra cost. The pump may be mounted in any position. FITTINGS: The standard pump head has 1/2" quick connect ports. Order fittings separately.
*Geolast- nitrile based thermoplastic elastomer used in place of nitrile (Buna-N) or neoprene for non-aggressive water-based applications *Santoprene- EPDM-based thermoplastic elastimer and is resistant to mild acids, some solvents and bases
| Model Number | 5501-1E12-B526 |
|---|---|
| Series | Demand Pump Electric Diaphragm 550 |
| Max Flow (GPM.) | 4 |
| Max Flow GPH | 240 |
| TDH Maximum (Ft) | 138 |
| TDH Maximum (PSI) | 60 |
| inlet size | Less than 1" |
| Inlet (In.) | 0.5 |
| Outlet (In.) | 0.5 |
| Wetted Materials | PolyPro-GF |
| Elastomers / O-ring | EPDM |
| Diaphragm | Santoprene |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 50/60 |
| Motor | TENV |
| Self Priming | Yes |
| Suction Lift (FT.) | 7 |
| Max Operating Temperature (F) | 145 |
| Viscosity | SAE 30 oil 352.00 cp 2000.00 ssu |
| Length (In.) | 9.000000 |
| Mechanical Seal | No |
| Mechanical Seal Type | Double |
| Other | Pressure switch is adjustable within certain range 70 psi. Motor is a permanent magnet - brush type with ball bearings. If used at hign end of pressure range, use for time periods <40 minutes. See temperature performance curve. No power cord. |
| Drain | No |
| Port Rotation | No |
| Weight (Lbs) | 8.000000 |
| Warranty (YRS.) | 1 |
Supporting Docs
Supporting Docs
You May Be Interested In
