My Cart

5 chamber diaphragm pump

5GPM 70PSI 115v
Model Number
5503-1FE1-J526
$198.00
Aquatec 5503-1FE1-J526 5 chamber diaphragm pump
550 Series Super Flow Pump: Reverse Osmosis System Pump, High Powered RO/DI Reverse Osmosis Pump

OPERATION: The 550 pumps can draw water from a holding tank and pressurize it, or boost the pressure from a low pressure source. It is designed to operate intermittently, but most versions can run continuously for several hour intervals.It can be operated in demand mode controlled by an integral pressure switch,or in delivery mode controlled by an external power switching device. Anintegral bypass may be used to limit pressure. POWER: The power demand varies depending on flow and pressure from 50W to 200W. Motors are available in various configurations from 12 VDC to 230 VAC. Transformersor DC power supplies are optional and must be ordered separately if applicable.Standard termination are 12" Long 16 AWG lead wires with a stripped end,connectors or cords with plugs are optional. MOUNTING: A steel mounting base with four hollow rubber grommets is standard and includedat no extra cost. The pump may be mounted in any position. FITTINGS: The standard pump head has a .750" port opening that accepts "quick connect" beverage style O-ring barb fittings, for use with 5/8" (16 mm) ID tubing. The pump can be ordered with a 1/2 NPT female ports. See model designation

*Geolast- nitrile based thermoplastic elastimer used in place of nitrile (Buna-N) or neoprene for non-aggressive water-based applications*Santoprene- EPDM-based thermoplastic elastimer and is resistant to mild acids, some solvents and bases

*Geolast- nitrile based thermoplastic elastimer used in place of nitrile (Buna-N) or neoprene for non-aggressive water-based applications *Santoprene- EPDM-based thermoplastic elastimer and is resistant to mild acids, some solvents and bases

Click here for strainers.

More Information
Model Number 5503-1FE1-J526
Series Demand Pump Electric Diaphragm 550
Max Flow (GPM.) 5
Max Flow GPH 300
TDH Maximum (Ft) 162
TDH Maximum (PSI) 70
Inlet Connection Type Barb
inlet size Less than 1"
Inlet (In.) 0.5
Outlet Connection Type Barb
Outlet (In.) 0.5
Wetted Materials Nylon
Elastomers / O-ring EPDM
Diaphragm Santoprene
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor TENV
Self Priming Yes
Suction Lift (FT.) 11
Max Operating Temperature (F) 140
Viscosity SAE 30 oil 352.00 cp 2000.00 ssu
Length (In.) 9.000000
Mechanical Seal No
Mechanical Seal Type Double
Other includes 6 ft. cord and plug. Pressure switch is adjustable within certain range. Motor is a permanent magnet - brush type. If used at hign end of pressure range, use for time periods <40 minutes. See temperature performance curve.
Drain No
Port Rotation No
Weight (Lbs) 6.000000

Supporting Docs

Supporting Docs
pdf
(Size: 255.71 KB) Extension: pdf