5 chamber diaphragm pump 12v
-
Manufacturer:
-
Series (21 Models):
-
Product Name:5 chamber diaphragm pump 12v
-
Model Number:5510-1D01-B636
Model Number
5510-1D01-B636
$199.00
Aquatec 5510-1D01-B636
OPERATION: The 550 pumps can draw water from a holding tank and
pressurizeit, or boost the pressure from a low pressure source. It
is designed to operate intermittently, but most versions can run
continuously for several hour intervals.It can be operated in
demand mode controlled by an integral pressure switch,or in
delivery mode controlled by an external power switching device.
Anintegral bypass may be used to limit pressure.
POWER: The power demand varies depending on flow and
pressure from 50W to 200W. Motors are available in various
configurations from 12 VDC to 230 VAC. Transformersor DC power
supplies are optional and must be ordered separately if
applicable.Standard termination are 12" Long 14 AWG lead wires with
a stripped end,connectors or cords with plugs are optional.
MOUNTING: A steel mounting base with four hollow rubber
grommets is standard and includedat no extra cost. The pump may be
mounted in any position.
FITTINGS: The standard pump head has 1/2 NPT female
ports.The pump can be ordered with a .750" port opening that
accepts "quick connect" beverage style O-ring barb fittings, for
use with 5/8" (16 mm) ID tubing. See model designation
*Geolast- nitrile based thermoplastic elastimer used in place of nitrile (Buna-N) or neoprene for non-aggressive water-based applications *Santoprene- EPDM-based thermoplastic elastimer and is resistant to mild acids, some solvents and bases
Click here for strainers.
| Model Number | 5510-1D01-B636 |
|---|---|
| Series | Demand Pump Electric Diaphragm 550 |
| Max Flow (GPM.) | 2 |
| Max Flow GPH | 120 |
| TDH Maximum (Ft) | 115 |
| TDH Maximum (PSI) | 50 |
| Inlet Connection Type | FNPT |
| inlet size | Less than 1" |
| Inlet (In.) | 0.5 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 0.5 |
| Wetted Materials | PolyPro-GF |
| Elastomers / O-ring | EPDM |
| Diaphragm | Santoprene |
| Voltage (V) | 12DC |
| Voltage (Range) | 12/24/36 VDC |
| Motor | TENV |
| Self Priming | Yes |
| Suction Lift (FT.) | 7 |
| Max Operating Temperature (F) | 145 |
| Viscosity | SAE 30 oil 352.00 cp 2000.00 ssu |
| Length (In.) | 9.000000 |
| Mechanical Seal | No |
| Mechanical Seal Type | Double |
| Other | Pressure switch is adjustable within certain range 30 - 70 psi. Motor is a permanent magnet - brush type. If used at hign end of pressure range, use for time periods <40 minutes. See temperature performance curve. |
| Drain | No |
| Port Rotation | No |
| Weight (Lbs) | 7.000000 |
| Warranty (YRS.) | 1 |
Supporting Docs
Supporting Docs
You May Be Interested In
