Accessories
Pump accessories available include:
- Suction & Discharge hoses, Hose kits in several materials and ratings.
- Valves: Check one way, Foot valve, flow control in plastic, brass, bronze and Stainless
- Suction strainers: Barrel, Trash, Top / Bottom low level, Long narrow in both metal and plastic
- Hose fittings: Quck connect / Cam locks, Threaded couplings
- Motor Starters: UL listed NEMA 1 and 4X
- Motor base plates, shaft couplings
- Float Level Switches: Electro-mechanical, Solid state, alarms, Wi-Fi
- VFD motor control: Variable Frequency Drive allows speed control of the electric motor
-
Generic Pump
Base plate
PBP1822
$49.00Pump Mounting base, For Gear and Centrifugal Pumps, Height 1 3/4 Inches, Width 18 Inches, Depth 22 Inches, Flange Width 1 Inch, 10 Gauge Stamped Steel, painted steel. -
Munro Pumps
Flow Sleeve & SS Stand
SA400FS&S
$356.00Submersible Pump & Motor System
The Munro SA400FS&S is a high-performance submersible pump and motor system designed for efficient and reliable water flow. Installed at a 15ï½ angle within a cistern, this system ensures optimal operation while ...
-
Munro Pumps
3" Brass Check valve
CV12T
$265.00- certified red brass casting
- Stainless Steel Springs
- Non-Corrosive derlin stem guide
- Abasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
-
Munro Pumps
1/2" Brass Check Valve
CV2T
$16.00- certified red brass casting
- Stainless Steel Springs
- Non-Corrosive derlin stem guide
- Abasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
-
Munro Pumps
3/4" Brass Check Valve
CV3T
$22.00- certified red brass casting
- Stainless Steel Springs
- Non-Corrosive derlin stem guide
- Abasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
-
Munro Pumps
1" Brass Check Valve
CV4T
$22.00- No Lead Bronze casting
- Stainless Steel Springs
- Non-Corrosive Derlin stem guide
- Abrasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
1" Check valve Learn More -
Munro Pumps
1 1/4" Brass Check Valve
CV5T
$39.00- certified red brass casting
- Stainless Steel Springs
- Non-Corrosive derlin stem guide
- Abasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
-
Munro Pumps
1 1/2" Brass Check valve
CV6T
$49.00- certified red brass casting
- Stainless Steel Springs
- Non-Corrosive derlin stem guide
- Abasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
-
Munro Pumps
2" Brass Check valve
CV8T
$64.00- certified red brass casting
- Stainless Steel Springs
- Non-Corrosive derlin stem guide
- Abasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
-
PumpBiz
1 1/2" Quick Disconnect Couplings
QDB-1.5
$18.00These cam lock couplings are cast aluminum cam lock fittings. Makes a quick leak-proof connection. Use on suction and discharge hoses. male coupler Part "B"
