Accessories
Pump accessories available include:
- Suction & Discharge hoses, Hose kits in several materials and ratings.
- Valves: Check one way, Foot valve, flow control in plastic, brass, bronze and Stainless
- Suction strainers: Barrel, Trash, Top / Bottom low level, Long narrow in both metal and plastic
- Hose fittings: Quck connect / Cam locks, Threaded couplings
- Motor Starters: UL listed NEMA 1 and 4X
- Motor base plates, shaft couplings
- Float Level Switches: Electro-mechanical, Solid state, alarms, Wi-Fi
- VFD motor control: Variable Frequency Drive allows speed control of the electric motor
-
PumpBiz
Adjustable Hose Nozzle 3/4"
FNB75GHT
$45.00The adjustable nozzles are lightweight Thermoplastic and under normal operating conditions of 100 psi are very easy to handle. These nozzles were designed for the express use of firefighting with water. They may also be used for industrial washdo...Garden Hose Learn More -
PumpBiz
Adjustable Hose Nozzle
75NPSH
$28.00The Prosser nozzles are lightweight Thermoplastic and under normal operating conditions of 100 psi are very easy to handle. These nozzles were designed for the express use of firefighting with water. They may also be used for industrial washdown ...3/4" Learn More -
PumpBiz
Adjustable Hose Nozzle
JAHN-150
$43.00Prosser nozzles are lightweight Thermoplastic and under normal operating conditions of 83.6gpm @ 100 psi are very easy to handle. These nozzles were designed for the express use of firefighting with water. Thread is NPS. They may also be used for ...
1.5" Plastic Learn More -
PumpBiz
Adjustable Hose Nozzle
2NPSH
$51.00The Prosser nozzles are lightweight Thermoplastic and under normal operating conditions of 100 psi are very easy to handle. These nozzles were designed for the express use of firefighting with water. They may also be used for industrial washdown a...
-
PumpBiz
Adjustable Hose Nozzle Fire
2NST
$141.00Adjustable Prosser FIRE nozzles are lightweight Thermoplastic and under normal operating conditions of 100 psi are very easy to handle at the end of a water hose. These nozzles were designed for the express use of firefighting with water. They ...Fire Hose Thread NST Learn More -
Generic Pump
Base plate
PBP1822
$49.00Pump Mounting base, For Gear and Centrifugal Pumps, Height 1 3/4 Inches, Width 18 Inches, Depth 22 Inches, Flange Width 1 Inch, 10 Gauge Stamped Steel, painted steel. -
Munro Pumps
Flow Sleeve & SS Stand
SA400FS&S
$356.00Submersible Pump & Motor System
The Munro SA400FS&S is a high-performance submersible pump and motor system designed for efficient and reliable water flow. Installed at a 15ï½ angle within a cistern, this system ensures optimal operation while ...
-
Munro Pumps
3" Brass Check valve
CV12T
$265.00- certified red brass casting
- Stainless Steel Springs
- Non-Corrosive derlin stem guide
- Abasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
-
Munro Pumps
1/2" Brass Check Valve
CV2T
$16.00- certified red brass casting
- Stainless Steel Springs
- Non-Corrosive derlin stem guide
- Abasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
-
Munro Pumps
3/4" Brass Check Valve
CV3T
$22.00- certified red brass casting
- Stainless Steel Springs
- Non-Corrosive derlin stem guide
- Abasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
