Accessories
Pump accessories available include:
- Suction & Discharge hoses, Hose kits in several materials and ratings.
- Valves: Check one way, Foot valve, flow control in plastic, brass, bronze and Stainless
- Suction strainers: Barrel, Trash, Top / Bottom low level, Long narrow in both metal and plastic
- Hose fittings: Quck connect / Cam locks, Threaded couplings
- Motor Starters: UL listed NEMA 1 and 4X
- Motor base plates, shaft couplings
- Float Level Switches: Electro-mechanical, Solid state, alarms, Wi-Fi
- VFD motor control: Variable Frequency Drive allows speed control of the electric motor
-
Munro
Start Box 220 coil volt
MPSR220A290
$1,039.00StartBox The water level control box is a simple, cost effective control for applications when the water level is variable. The Munro water level control provides pilot duty operation when thermal overload protection is present, for example, subme...
Irrigation pump controller 230v Learn More -
Munro
Start Box
MPSR24
$101.56The Pump Start Relay (PSR) Provides "pilot duty" operation for all types of ellectricly driven pump equipment. Full compatibility with all 110 volt or 220 volt, single phase pumps, 3/4 HP through 2HP, and all 24V controllers.
- HP: 3/4 through 2 ...
-
Munro
Start Box 110 coil volt
MPSR110
$120.00The Pump Start Relay(PSR) Provides "pilot duty" operation for all types of ellectricly driven pump equipment. Full compatibility with all 110 volt or 220 volt, singlephase pumps, 3/4 HP through 2HP, and all 24V controllers.
- HP: 3/4 through 2...
-
Munro
Start Box 220 coil volt
MPSR220
$120.00The Pump Start Relay (PSR) Provides "pilot duty" operation for all types of electricity driven pump equipment. Full compatibility with all 110 volt or 220 volt, single phase pumps, 3/4 HP through 2HP, and all 24V controllers.
- HP: 3/4 through...
Irrigation pump controller 230v Learn More -
Munro
Flow Sleeve & SS Stand
SA400FS&S
$356.00According to the Picture:
- Submersible Pump & Motor: Installed in cistern at 15ï½° angle with flow sleeve to meet manufacturer's requirements.
- Check Valve: Holds system pressure from flowing back into cistern or main city line.
- Discharge Hose: NS...
-
Munro
3" Brass Check valve
CV12T
$265.00- certified red brass casting
- Stainless Steel Springs
- Non-Corrosive derlin stem guide
- Abasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
-
Munro
1/2" Brass Check Valve
CV2T
$16.00- certified red brass casting
- Stainless Steel Springs
- Non-Corrosive derlin stem guide
- Abasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
-
Munro
3/4" Brass Check Valve
CV3T
$22.00- certified red brass casting
- Stainless Steel Springs
- Non-Corrosive derlin stem guide
- Abasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
-
Munro
1" Brass Check Valve
CV4T
$27.00- No Lead Bronze casting
- Stainless Steel Springs
- Non-Corrosive Derlin stem guide
- Abrasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
1" Check valve Learn More -
Munro
1 1/4" Brass Check Valve
CV5T
$39.00- certified red brass casting
- Stainless Steel Springs
- Non-Corrosive derlin stem guide
- Abasion-resistant neoprene O-ring
- Machined exterior
- 200 psi WOG
