Powered by Honda GX120 Commercial Engine gas. Koshin 2" Diaphragm pumps features 2-stage, 44 to 1 gear reduction with a large diameter output gear and heavy duty ball bearing construction. Often referred to as Mud pumps, mudhog or Sludge pumps, diaphragm pumps are designed to pump mud, slurry, sewage, and thick water liquids that have the ability to flow.
Honda gasoline engines. Built-in molded polyurethane flapper/check valve assures self-priming to 20 feet after initial prime. Heavy duty gear box is designed to operate pumps at 60 strokes per minute. Each unit includes a 2" NPT steel suction strainer, two 2" NPT nipples, and wheel kit with 10" semi-pneumatic transport wheels for portability. Pumps are designed for use with non-flammable liquids which are compatible with pump component materials. Mud Trash pumps Suction and discharge port size cannot be reduced.
Suction and discharge port size cannot be reduced. Due to positive pumping action of diaphragm pumps, by all mfr's, the discharge is recommended to only be 25FT long unless oversized. Discharge can not be restricted. There is no relief valve.
For Ch&E Magnum MCP 2" Gas Engine Powered Diaphragm Pumps, call for parts.
| Model Number | KDP-50X |
|---|---|
| Series | Trash Pumps Honda Gas by Koshin |
| Max Flow (GPM.) | 50 |
| Max Flow GPH | 3000 |
| TDH Maximum (Ft) | 25 |
| TDH Maximum (PSI) | 11 |
| Horse Power (HP) | 4 |
| Horsepower (IE .5, 1, 1.5, 20) | 4.0000 |
| Inlet Connection Type | FNPT |
| Inlet (In.) | 2 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 2 |
| Wetted Materials | Aluminum |
| Elastomers / O-ring | Urethane |
| Diaphragm | Santoprene |
| Motor Amps (A) | 15.8 |
| Motor | Gas Engine |
| Self Priming | Yes |
| Suction Lift (FT.) | 20 |
| Max Operating Temperature (F) | 180 |
| Viscosity | Catsup 3000.00 cp 20000.00 ssu |
| Length (In.) | 42.2000 |
| Mechanical Seal | No |
| Other | Never restrict discharge hose since damage to diaphragm may occur. Do not use long hose, see manual. Included: (1) Pump(1) Handle(1) Strainer(2) NPT nipples(1) Pneumatic wheel kit |
| Drain | No |
| Port Rotation | Yes |
| Run Time (HR.) | 2 |
| Fuel Tank Size | 0.66 |
| Country of Manufacture | United States |
| Weight (Lbs) | 168.000000 |
| Warranty (YRS.) | 2 |
