My Cart

Reciprocating Pumps - Diaphragm, Piston, Plunger

These pumps have a diaphragm, piston or plunger which is reciprocating back and forth through a fixed stoke length. The diaphragm pumps use a circular semi-flat membrane that is flexed from a concave to a convex shape within a sealed chamber. There is no actual sliding contact of parts in the pumping chamber and therefore these pumps can handle solids, slurries, fibrous and very thick liquids quit well. Most diaphragm pumps are air operated, but electric do exist. Electric models are typically very small with several individual diaphragms working in series being driven by a rotating angled cam or a single diaphragm being driven by a mechanical connection to a solenoid. In this case, they are typically designed as metering pumps. Piston pumps like the name implies have a piston, ceramic typically, reciprocating within a very tight tolerance cylinder. Because of their materials of construction and mechanical design, they produce extremely high discharge pressures. By making them with several pistons working together in a single head a semi-steady flow can be obtained. With any of these pumps special consideration must be given to the cyclic pressure or hydraulic pulsation’s which naturally occur.Typical Positive Displacement Reciprocating pumps include AODD, single diaphragm, electric diaphragm, metering or proportioning and piston to name a few.
View as List Grid

Items 111-120 of 470

Set Descending Direction
per page
Page
  1. AMT_336g 2" gas mud diaphragm pump

    AMT Pumps

    2" Gas Powered Diaphragm Pump

    69-G633
    $2,656.25

    Mud pump. Powered by 4 HP Honda GX 120 Engine. AMT 2" Diaphragm pumps features 2-stage, 44 to 1 gear reduction with a large diameter output gear and heavy duty ball bearing construction. Often referred to as Mud pumps, mudhog or Sludge pumps, diap...

    Honda GX120 Learn More
    Add to Wish List Add to Compare
  2. General Pump KEZ30HA KE 3plex Plunger 25hp

    General Pump

    KE 3plex Plunger 25hp

    KEZ30HA
    $11,256.35
    EKN Series, Triplex Plunger Pump with 316SS Manifold and Wetted Parts; 431 SS Valve Plate and Seat**Max. Inlet Pressure: 45 PSI**Max. Fluid Temperature: 140FPump Dimensions: 18.2" x 17.5" x 7.3"
    Learn More
    Add to Wish List Add to Compare
  3. Riverside_DP3h diaphragm pump

    Riverside

    3 in. Honda diaphragm pump

    DP3H
    $2,130.00

    Diaphragm pumps are positive displacement pumps. They pump a specific volume for each pump cycle. Diaphragm pumps move fluids more slowly than centrifugal pumps, but can handle mud and larger amounts of solids including abrasive materials. They al...

    5.5 hp Honda engine Learn More
    Add to Wish List Add to Compare
  4. General Pump KEZ20A KE 3plex Plunger 23.6hp

    General Pump

    KE 3plex Plunger 23.6hp

    KEZ20A
    $11,256.35
    EKN Series, Triplex Plunger Pump with 316SS Manifold and Wetted Parts; 431 SS Valve Plate and Seat**Max. Inlet Pressure: 45 PSI**Max. Fluid Temperature: 140FPump Dimensions: 18.2" x 17.5" x 7.3" Click here to view more information on this pu...
    Learn More
    Add to Wish List Add to Compare
  5. Remco 5538-1i1-63A 100PSI Bypass

    Remco

    100PSI Bypass

    5538-1i1-63A
    $306.88

    NEW MODEL NUMBERS TO REVIEW: 5518-2I1-94A or 5538-2I1-94A

    THE PROFLO FATBOY® PUMPS UP THE VOLUME WITH 5.3gpm. Demanding industrial pump environments require precise engineering and quality components the ProFlo FatBoy® was designed with both. T...

    5.3/gpm 100psi 12VDC Learn More
    Add to Wish List Add to Compare
  6. Remco_demand pump

    Remco

    115v Demand Pump 2GPM

    3323-1E1-52C
    $206.41

    Demanding industrial pump environments require precise engineering and quality components. The demand pump was designed with both. Demand pumps operate as a positive displacement pump which has a pressure switch built in. When flow is open the pum...

    2.2 GPM Demand 60 PSI Viton Santoprene 3/8″ FNPT 110/120 VAC Learn More
    Add to Wish List Add to Compare
  7. General Pump KE28HA KE 3plex Plunger 24.0hp

    General Pump

    KE 3plex Plunger 24.0hp

    KE28HA
    $7,500.85
    EKN Series, Triplex Plunger Pump with 316SS Manifold and Wetted Parts; 431 SS Valve Plate and Seat**Max. Inlet Pressure: 45 PSI**Max. Fluid Temperature: 140FPump Dimensions: 18.2" x 17.5" x 7.3"
    Learn More
    Add to Wish List Add to Compare
  8. Pulsafeeder 068-XA-AAAAXXX 68 GPD/60 PSI Metering Pump

    Pulsafeeder

    68 GPD/60 PSI Metering Pump

    068-XA-AAAAXXX
    $693.00
    68 GPD / 257.38 LPD 100 PSI metering pump 115 vac. 51 strokes / minute max. 1.0 Amps full load.

    Dimensions: 6.75" x 8.875" x 7.25" (H x W x D)

    Learn More
    Add to Wish List Add to Compare
  9. Remco - 3323-1E1-82B: 12v Demand Pump 2GPM

    Remco

    12v Demand Pump 2GPM

    3323-1E1-82B
    $196.58

    Demanding industrial pump environments require precise engineering and quality components the demand pump was designed with both. Demand pumps operated as a positive displacement pump which has a pressure switch built in. When flow is open the pum...

    2.2 GPM Demand 60 PSI Viton Santoprene 3/8″ FNPT 12 VDC Learn More
    Add to Wish List Add to Compare
  10. Riverside DP3B 3 in. 3.5 hp briggs diaphragm pump

    Riverside

    3 in. 3.5 hp briggs diaphragm pump

    DP3B
    $1,938.00

    Premium Series Diaphragm Pump

    Riverside Pumps’ rugged and reliable diaphragm pumps, often called “mudhogs”, are built to handle heavy mud and sludge thicker than any centrifugal pump can manage. Designed for tough jobs, they can also run dr...

    Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 111-120 of 470

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Shopping Options
Category
  1. Air Operated Double Diaphragm Pumps 103 items
  2. Cast Iron Pumps 57 items
  3. Chemical Feed Pumps 115 items
  4. Chemical Processing Pumps 95 items
  5. Corrosion Resistant Plastic 98 items
  6. Diaphragm Pumps 146 items
  7. Drainage Dewatering Pumps 42 items
  8. Dry Running Pumps 153 items
  9. Electric Diaphragm Pumps 54 items
  10. Metal Alloy Pumps 82 items
  11. Metering Pumps 98 items
  12. Non-Metallic Pumps 69 items
  13. Piston Pumps 4 items
  14. Plunger Pumps 276 items
  15. Solids Handling Pumps 100 items
Phase (Ø)
  1. Single (1) 43 items
  2. Three (3) 1 item
Voltage (Range)
  1. 110-120 42 items
  2. 208-240 1 item
  3. 110-120/220-240 4 items
  4. 220-240 1 item
  5. 460-480 1 item
  6. 12/24/36 VDC 25 items
Horse Power (HP)
  1. 1/2 1 item
  2. 1 1/2 5 items
  3. 2 14 items
  4. 2 1/2 3 items
  5. 3 12 items
  6. 3 1/2 4 items
  7. 4 9 items
  8. 5 10 items
  9. 5 1/2 5 items
  10. 6 9 items
  11. 7 10 items
  12. 8 7 items
  13. 9 6 items
  14. 10 5 items
  15. 11 7 items
  16. 13 10 items
  17. 15 1 item
  18. 18 1 item
  19. 25 4 items
inlet size
  1. Less than 1in 202 items
  2. 1in 47 items
  3. 1 ½" 37 items
  4. 2in 15 items
  5. 2 ½" 48 items
  6. 3" 9 items
PRICE $
$  -  $
Manufacturer
  1. All-Flo Pumps 83 items
  2. AMT Pumps 6 items
  3. Aquatec Pumps 1 item
  4. Barmesa Pumps 1 item
  5. Barnes Pumps 2 items
  6. Flojet Pumps 19 items
  7. General Pump 269 items
  8. Graco Pumps 1 item
  9. Hypro Pumps 5 items
  10. March Pumps 2 items
  11. Pulsafeeder 24 items
  12. Pumptec 6 items
  13. Remco 35 items
  14. Riverside 14 items
  15. Tsurumi 2 items
Motor
  1. Air-Pneumatic 101 items
  2. Diesel Engine 1 item
  3. Gas Engine 9 items
  4. Hermetically Sealed 4 items
  5. ODP 4 items
  6. TEFC 19 items
  7. TENV 38 items