Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Stanley
Stanley Hydraulic Submersible Pump
TP08
$4,537.12Trash Pumps Hydraulic submersible TP08-013. Like our detwatering pumps, the pure power of hydraulic tools is also exemplified in our trash pumps. Stanley TP08013 pump discharges an impressive 800 gallons per minute (3028 lpm) and can handle up to ...
4" Hydraulic submersible pump Learn More -
Stanley
Stanley Hydraulic Submersible Pump
SM50100
$3,164.00Dewatering Pumps SM50 pump discharges an impressive 500 gallons per minute (1890 lpm) while it's small size allows it to fit in a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm). Stanley hydraulic pumps exemplify the pure power of hydra...
Hydraulic Dewatering pump 3" Learn More