Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Tsurumi
PSF Pond Pump
50PSF2.75S-61 115V
$908.00Tsurumi Submersible Pond Fountain Pumps. Manual Operation- Watertight Cable Entrance with Anti-wicking block.
- Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
- Built in motor protection
- Continuous duty air filled copper wo...
115v/1 Learn More -
Tsurumi
1 hp Saltwater pump
50TMA2.75
$1,910.00Saltwater pumps submersible Semi vortex.The all wetted parts are made of titanium, Far stronger than stainless steel, titanium will never rust in sea water or under similar conditions. Automatic version. Float is internally wired.
APPLICATIO...230 or 460V Automatic Learn More -
Tsurumi
PSF Pond Pump
50PSF2.75S-60 230
$908.00Tsurumi Submersible Pond Fountain Pumps. Manual Operation- Watertight Cable Entrance with Anti-wicking block.
- Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
- Built in motor protection
- Continuous duty air filled copper wo...
230v/1 1HP Learn More -
Tsurumi
1 hp Saltwater pump
50TMA2.75S
$1,910.00Saltwater pumps submersible Semi vortex.The all wetted parts are made of titanium, Far stronger than stainless steel, titanium will never rust in sea water or under similar conditions. Automatic version. Float is internally wired.
APPLICATIO...230 1phase Automatic Learn More -
EBARA Pumps
PRO Cast Sewage Pump 2.5" Solids
100DSU65.52
$4,743.68- Air filled, Class F insulated, heavy duty motor, rated for 20 starts/hour, dissipates heat easily, operates cooler with higher efficiencies; long service life with lower operating costs
- Built-in motor protection with autocut, protects motor a...
7 1/2HP 208-230V HS Learn More -
EBARA Pumps
PRO Cast Sewage Pump 6"
150DMLEU6112
$5,034.08- Air filled, Class F insulated, heavy duty motor, rated for 20 starts/hour, dissipates heat easily, operates cooler with higher efficiencies; long service life with lower operating costs
- Built-in motor protection with autocut, protects motor a...
15HP 230V HS Learn More -
EBARA Pumps
Stainless Steel Ebara Pump
EPD-10MT2
$1,842.001HP Pro Drainer submersible dewatering pump. The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits thi...1HP 208-230V HS Learn More -
EBARA Pumps
PRO Cast Sewage Pump 2.5" Solids
80DLMU61.5
$3,991.79Ebara submersible sewage pump Applications- Watering
- Dewatering
- Drainage
-
Construction
- Air filled, Class F insulated, heavy duty motor, rated for 20 starts/hour, dissipates heat easily, operates cooler with higher effici...
2HP 460V HS Learn MoreEBARA Pumps
PRO Cast Sewage Pump 2.5" Solids
80DLFU61.54
$3,767.94CLFU submersible non-clog pumps are constructed of rugged cast iron with heavy duty, high efficiency motors suitable for industrial and municipal water and wastewater applications, including flood control. The high efficiencies impeller make it...3HP 460V HS Learn More