PRO Cast Sewage Pump 2.5" Solids
-
Manufacturer:
-
Series (7 Models):
-
Product Name:PRO Cast Sewage Pump 2.5" Solids
-
Model Number:80DLMU61.5
Ebara submersible sewage pump Applications
- Watering
- Dewatering
- Drainage
-
Construction
- Air filled, Class F insulated, heavy duty motor, rated for 20 starts/hour, dissipates heat easily, operates cooler with higher efficiencies; long service life with lower operating costs
- Built-in motor protection with autocut, protects motor against overheating, single phasing, and no load; saves money on costly motor replacement
- Molded cable prevents capillary action; reduces maintenance costs
- 60,000 hour bearings; ensures long, dependable operation and lowers maintenance costs
- 2.5" solids handling capabilities prevents clogging
- Open impellers offer the best design for handling stringy and/or abrasive materials due to the large wear area and open passageways, providing durability and longer life
- High quality stainless steel shaft; provides high tensile strength, corrosion resistance, longer life, and lower maintenance costs
- Double mechanical seals - silicon carbide lower seals, carbon/ceramic upper - hard faced upper and lower seals operate in an oil bath; providing longer service life and lower maintenance costs
- High wire to water efficiencies reduced power consumption; reduced cost of operation
- Available for slide rail installations provides ease of maintenance for small sump type installations
- Submersible cable - 33ft (Optional 66 ft cable)
- Open Impeller
- Service factor: 1.15
| Model Number | 80DLMU61.5 |
|---|---|
| Series | CLU Submersible Sewage Pump |
| Max Flow (GPM.) | 360 |
| Max Flow GPH | 21600 |
| TDH Maximum (Ft) | 35 |
| TDH Maximum (PSI) | 15 |
| Horse Power (HP) | 2 |
| Horsepower (IE .5, 1, 1.5, 20) | 2.0000 |
| Outlet Connection Type | Flange |
| Outlet (In.) | 3 |
| Wetted Materials | Cast Iron |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 460 |
| Voltage (Range) | 460-480 |
| Phase (Ø) | Three (3) |
| Motor Frequency | 60 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 1725 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 104 |
| Viscosity | SAE 10 oil 88.00 cp 500.00 ssu |
| Shaft | 416SS |
| Length (In.) | 28.000000 |
| Mechanical Seal | No |
| Mechanical Seal Face | SiC-Ceramic |
| Mechanical Seal Type | Double |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 172.000000 |
| Warranty (YRS.) | 1 |
>
You May Be Interested In
