PRO Cast Sewage Pump 2.5" Solids
-
Model Number:
100DSU65.52
-
Product Name:PRO Cast Sewage Pump 2.5" Solids
-
Manufacturer:
-
Series (7 Models):
7 1/2HP 208-230V HS
Model Number
100DSU65.52
$4,743.68
EBARA 100DSU65.52
The EBARA 100DSU65.52 is a 7 1/2 HP submersible sewage pump from EBARA's Dominator series, built entirely of 304 stainless steel for corrosion resistance and long service life. Its non-clog impeller passes solids up to 2.5in in diameter, making it suited to lift stations, commercial sewage and effluent handling, and wastewater applications with suspended solids. This configuration has no float switch and is intended for manual or panel-controlled installations and runs on a 208-230V HS motor. This Pro-Cast configuration uses an air-filled, heavy-duty motor rated for 20 starts per hour with Class F motor insulation and built-in autocut overload protection, suited to heavier commercial and light municipal sewage and dewatering applications.
- Air filled, Class F insulated, heavy duty motor, rated for 20 starts/hour, dissipates heat easily, operates cooler with higher efficiencies; long service life with lower operating costs
- Built-in motor protection with autocut, protects motor against overheating, single phasing, and no load; saves money on costly motor replacement
- Molded cable prevents capillary action; reduces maintenance costs
- 60,000 hour bearings; ensures long, dependable operation and lowers maintenance costs
- 2.5" solids handling capabilities prevents clogging
- Open impellers offer the best design for handling stringy and/or abrasive materials due to the large wear area and open passageways, providing durability and longer life
- High quality stainless steel shaft; provides high tensile strength, corrosion resistance, longer life, and lower maintenance costs
- Double mechanical seals - silicon carbide lower seals, carbon/ceramic upper - hard faced upper and lower seals operate in an oil bath; providing longer service life and lower maintenance costs
- High wire to water efficiencies reduced power consumption; reduced cost of operation
- Available for slide rail installations provides ease of maintenance for small sump type installations
- Submersible cable - 33ft (Optional 66 ft cable)
- Open Impeller
- Service factor: 1.15
| Model Number | 100DSU65.52 |
|---|---|
| Series | CLU Submersible Sewage Pump |
| Max Flow (GPM.) | 355 |
| Max Flow GPH | 21300 |
| TDH Maximum (Ft) | 105 |
| TDH Maximum (PSI) | 22 |
| Horse Power (HP) | 7 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | 7.5000 |
| Outlet Connection Type | Flange |
| Outlet (In.) | 4 |
| Wetted Materials | Cast Iron |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 208-230 |
| Voltage (Range) | 208-240 |
| Phase (Ø) | Three (3) |
| Motor Frequency | 60 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 1725 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 104 |
| Viscosity | SAE 10 oil 88.00 cp 500.00 ssu |
| Shaft | 416SS |
| Mechanical Seal | No |
| Mechanical Seal Face | SiC-Ceramic |
| Mechanical Seal Type | Double |
| Impeller Number (In.) | 137 |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 195.000000 |
| Warranty (YRS.) | 1 |
>
EBARA pumps - Electric Stainless Steel and CI pumps - End Suction, Self-priming, multi-stage - Vertical, Sump, Effluent, Sewage, fountain submersibles. Pumps for water and chemicals. Ebara, pumps are found world wide. For Ebara parts use the PumpBiz search our parts database or call.
