PRO Cast Sewage Pump 2.5" Solids
-
Manufacturer:
-
Series (7 Models):
-
Product Name:PRO Cast Sewage Pump 2.5" Solids
-
Model Number:80DLFU61.54
CLFU submersible non-clog pumps are constructed of rugged cast iron
with heavy duty, high efficiency motors suitable for industrial and
municipal water and wastewater applications, including flood
control. The high efficiencies impeller make it possible to pass
large solids up to 3 1/4".
Ebara submersible sewage pump Applications
- Watering
- Dewatering
- Drainage
- Construction
- Air filled, Class F insulated, heavy duty motor, rated for 20 starts/hour, dissipates heat easily, operates cooler with higher efficiencies; long service life with lower operating costs
- Built-in motor protection with autocut, protects motor against overheating, single phasing, and no load; saves money on costly motor replacement
- Molded cable prevents capillary action; reduces maintenance costs
- 60,000 hour bearings; ensures long, dependable operation and lowers maintenance costs
- 2.5" solids handling capabilities prevents clogging
- Open impellers offer the best design for handling stringy and/or abrasive materials due to the large wear area and open passageways, providing durability and longer life
- High quality stainless steel shaft; provides high tensile strength, corrosion resistance, longer life, and lower maintenance costs
- Double mechanical seals - silicon carbide lower seals, carbon/ceramic upper - hard faced upper and lower seals operate in an oil bath; providing longer service life and lower maintenance costs
- High wire to water efficiencies reduced power consumption; reduced cost of operation
- Available for slide rail installations provides ease of maintenance for small sump type installations
- Submersible cable - 33ft (Optional 66 ft cable)
- Open Impeller
- Service factor: 1.15
| Model Number | 80DLFU61.54 |
|---|---|
| Series | CLU Submersible Sewage Pump |
| Max Flow (GPM.) | 240 |
| Max Flow GPH | 14400 |
| TDH Maximum (Ft) | 35 |
| TDH Maximum (PSI) | 15 |
| Horse Power (HP) | 3 |
| Horsepower (IE .5, 1, 1.5, 20) | 3.0000 |
| Watts | 0.000000 |
| Outlet Connection Type | Flange |
| Outlet (In.) | 3 |
| Wetted Materials | Cast Iron |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 460 |
| Voltage (Range) | 460-480 |
| Phase (Ø) | Three (3) |
| Motor Frequency | 60 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 1725 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 104 |
| Viscosity | SAE 10 oil 88.00 cp 500.00 ssu |
| Shaft | 416SS |
| Length (In.) | 28.000000 |
| Mechanical Seal | No |
| Mechanical Seal Face | SiC-Ceramic |
| Mechanical Seal Type | Double |
| Approvals | UL |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 172.000000 |
| Warranty (YRS.) | 1 |
>
You May Be Interested In
