Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
Cast Iron Centrifugal Pump
368C-95
$692.75Centrifugal pump Designed for continuous-duty low pressure OEM, Industrial Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling.
For this Centrifugal pump see curve C
8249K211
230/460v/3phase 1/2HP TEFC Learn More -
Sta-Rite
JB Centrifugal Pump Med Head 1/2HP
JBMC-56S
$1,818.00This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wea...
-
Sta-Rite
JB Centrifugal Pump Med Head 1/2HP
JBMC3-56S
$1,696.00This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
Finish Thompson Pumps (FTI)
FTI DB8 pump
DB8P-M226
$1,317.07Magnetic coupled pump. Introducing the DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, the DB serie...1/2HP 115/230v Learn More -
Finish Thompson Pumps (FTI)
FTI DB8 pump
DB8V-M226
$1,660.09FTI DB8 Kynar pump is Magnetic coupled sealless. DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, th...1/2HP 115/230v TEFC Kynar Learn More -
Finish Thompson Pumps (FTI)
FTI DB6 pump
DB6HP-M227
$1,523.75Introducing the DB Series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics technology, the DB Series packs all the high-pressure, fl...
1/2HP 230/460v PolyPro Learn More -
AMT Pumps
SS Self PrimingPump
429A-98-3ph
$1,367.44Self Priming AMT 316 SS Transfer pumps
are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use with nonflamm...
230-460V 3phase 1/2HP TEFC Learn More -
Pacer Pumps
SE11/2ABL-G.5C Self priming pump
58-11A3-G.5C
$1,209.23Pacer S pump close coupled to a TEFC 115/230v 1 phase electric motor. Self priming pump, FRP plastic resists abrasive particles, good for most water transfer applications, fountains, irrigation. Pacer pumps are made in the USA. Pacer pump has b...1/2hp, 115.230v Learn More -
American Stainless
Stainless Steel pump & motor
C14311BBD1F
$1,022.08ASP Stainless Steel 1/2HP pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. The...1/2HP 115/230V ODP Learn More -
Pacer Pumps
SPRY1-1/2AV-G.5C
58-21A1-G.5
$897.00Pacer S pump close coupled to a TEFC 115/230v 1 phase electric motor. Self priming pump, POLY plastic resists abrasive particles, good for most water transfer applications, fountains, irrigation. Pacer pumps are made in the USA. Pacer pump has ....5HP/1750 Learn More
