MTH Turbine Pump 1/2HP
-
Model Number:
E41DSSPSXSAXX
-
Product Name:MTH Turbine Pump 1/2HP
-
Manufacturer:
-
Series (29 Models):
1/2hp SS 230/460v
Model Number
E41DSSPSXSAXX
$3,610.31
MTH E41DSSPSXSAXX
MTH pump. Mechanically sealled regenerative turbines for low flow
high pressure applications. Serving a wide variety of markets and
industries including boiler feed, condensate return, chillers /
temperature controllers, refrigeration, petroleum, as well as the
chemical industry and many other process applications.All units are
tested to specifications before leaving the factory.They are used
for boiler feed, condensate return and other hot water handling
applications and will handle entrained air, or other gases and
vapors in quantities that would vapor bind normal centrifugal pumps
(up to 20% by volume).
Low NPSH Requirements
| Model Number | E41DSSPSXSAXX |
|---|---|
| Series | MTH T41 Regenerative Turbine Pump to 20gpm |
| Max Flow (GPM.) | 6 |
| Max Flow GPH | 240 |
| Minimum Flow (GPM.) | 1.0000 |
| TDH Maximum (Ft) | 600 |
| TDH Maximum (PSI) | 260 |
| Horse Power (HP) | 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.5000 |
| Inlet Connection Type | FNPT |
| Inlet (In.) | 1 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 1 |
| Wetted Materials | 316SS |
| Elastomers / O-ring | FKM |
| Voltage (V) | 208-230/460 |
| Voltage (Range) | 208-240/460 |
| Phase (Ø) | Three (3) |
| Motor Frequency | 50/60 |
| Motor | TEFC |
| Speed (RPM.) | 3450 |
| Motor Frame | 56C |
| Self Priming | No |
| Max Operating Temperature (F) | 230 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | 304SS |
| Length (In.) | 15.0000 |
| Mechanical Seal Face | SiC |
| Mechanical Seal Type | Single |
| Impeller Number (In.) | B |
| Other | Pumps can be rotated in 90 increments or mounted vertically. Handles vapors up to 20% by volume. Low NPSHr. |
| Cord Length (Ft.) | 0 |
| Duty | Continuous |
| Drain | No |
| Port Rotation | Yes |
| Weight (Lbs) | 40.000000 |
>
You May Be Interested In
