Plastic Corrosion Resistant pump PCE2AL-G.5C
Series (23 Models):
Product Name:Plastic Corrosion Resistant pump PCE2AL-G.5C
115/230v 1/2 HP
Plastic Corrosion Resistant Pump 1/2HP 1750RPM.
PC Horizontal Pump
All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics provide resistance to many acids, bases, solvents, and salt water at temperatures as high as 200F (93C). "O"-rings and seals are FKM, EPDM or Buna N. Fasteners are stainless steel, with titanium or Hastelloy C internal fasteners, shaft seal and shaft adapter and Pacer's own Polymar non-metallic shaft seal for pumping highly corrosive liquids. Often used in aquaculture, lobster tanks, aquarium salt water
The 1 1/2" and 2" models are the same pump with both ports threaded 1 1/2" female and 2" male. The 3" pump has male threads only.
Pumps may be ordered with a chemical resistant Noryl bearing pedestal for long coupled direct drive or a cast iron pedestal for belt drive or heavy duty service. Close-coupled drives include electric, hydraulic or pneumatic motors and gasoline engines through 8HP.
- Non-metallic solution contact models available in all stock materials
- Flows to 230 U.S. GPM or 94 ft. TDH at 60 Hz (725 LPM or 20 M at 50Hz)
- Selection of drives-- Electric, Hydraulic or Pneumatic motors. Gasoline or Diesel Engines.
- Now available close-coupled to electric motors through 5HP
- Silicon Carbide seal available as option
Pacer Pumps is the originator and is recognized as the leading manufacturer of high-performance centrifugal pumps molded from tough modern thermoplastics. Our brand and service is often imitated but never duplicated. Successful adaptation of these products for agricultural, aquaculture, marine, farm/home and industrial applications has resulted in worldwide market acceptance. From farmers to fishermen to industrial mechanics, people turn to Pacer for quality pumps.
|Series||PC Plastic Corrosion Resistant Pump To 230gpm|
|Max Flow (GPM.)||80|
|Max Flow GPH||4800|
|TDH Maximum (Ft)||30|
|TDH Maximum (PSI)||14|
|Horse Power (HP)||1/2|
|Horsepower (IE .5, 1, 1.5, 20)||.5|
|Inlet Connection Type||FNPT|
|inlet size||1 ½"|
|Wetted Materials||PPO-Noryl, SS-Plastic|
|Elastomers / O-ring||EPDM|
|Phase (Ø)||Single (1)|
|Max Operating Temperature (F)||160|
|Viscosity||Milk 3.20 cp 40.00 ssu|
|Mechanical Seal Face||Carbon-ceramic|
|Mechanical Seal Type||Single|
|Impeller Number (In.)||A|
|Other||Pump is molded of glass reinforced polyester with ethylene propylene "O" rings, standard volute, 316SS internal hardware, 304SS external hardware. Motor shaft is extended with 316SS adapter.
Do not pump substances which have pH factor of over 10 or a temperature of over 160 Deg. F. The PERFORMANCE CHART is based on water.
|Impeller Material||Polyester, semi-open|
|Cord Length (Ft.)||0|
|Country of Manufacture||United States|
|GPM Of Water At 20 Feet Of Head||40|