Corrosion Resistant Pump
-
Model Number:
PC150R-T
-
Product Name:Corrosion Resistant Pump
-
Manufacturer:
-
Series (21 Models):
1 1/2HP 115/230V TEFC
Model Number
PC150R-T
$2,938.88
Webtrol PC150R-T
Corrosion Resistant Pump plastic construction. Webtrol pumps are proudly made in the USA. These pumps are often found on OEM machines like commercial flatware equipment, lobster tanks, water systems. The Webtrol PC Series Centrifugal is completely corrosion resistant through the use of 316 stainless steel motor shaft and high impact, glass reinforced Noryl plastic. The compact, light weight design on the PC Series Centrifugal makes it ideal for cabinet installation as well as skid mounting.
- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
To insure that you have no problems at start-up and throughout the operation of the pump, every complete pump is thoroughly tested for performance, electrical draw, noise and vibration.
Webtrol PC Series Booster Pumps are available from 5 to 60 Gallons Per Minute. Pressure boost to 50 PSI
Typical Services • Deionized Systems • Reverse Osmosis Systems • Distribution Systems • Car Wash Systems • Liquid Transfer Systems • Circulation Systems • Pre-Filter Charge System • Condensation Systems • Cooling Tower Systems
| Model Number | PC150R-T |
|---|---|
| Series | PC Corrosion resistant Centrifugal Pump to 50psi |
| Max Flow (GPM.) | 65 |
| Max Flow GPH | 3900 |
| Minimum Flow (GPM.) | 3 |
| TDH Maximum (Ft) | 113 |
| TDH Maximum (PSI) | 49 |
| TDH BEP (FT.) | 97 |
| Horse Power (HP) | 1 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | 1.5000 |
| Inlet Connection Type | FNPT |
| inlet size | 1 ½" |
| Inlet (In.) | 1.5 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 1.25 |
| Wetted Materials | 316SS, Noryl-PPO |
| Elastomers / O-ring | FKM |
| Voltage (V) | 115/230 |
| Voltage (Range) | 110-120/220-240 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | TEFC |
| Motor Frame | 56J thrd |
| Self Priming | No |
| Max Operating Temperature (F) | 180 |
| Viscosity | Water 1.00 cp 31.00 ssu |
| Mechanical Seal | 6 |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Single |
| Other | Motor has automatic reset and thermal overload protector. |
| Impeller Material | Noryl, closed |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 41.000000 |
| GPM Of Water At 80 Feet Of Head | 52 |
| GPM Of Water At 100 Feet Of Head | 38 |
>
You May Be Interested In
