My Cart

Stainless Steel pump & motor

115/230v 1/2HP ODP
Model Number
C14311BBD1F
$602.64
American Stainless C143118BD1F Stainless Steel pump  motor
ASP Stainless Steel 1/2HP pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps do not have a volute design casing, which can put a radial load on the motor bearing; and no diffuser to plug up, wear out, or replace. The SSPC is a closed impeller pump, which will have a higher efficiency & pressure capability. Silicon carbide seal with Viton oring. Pump motor has feet. 304 Stainless Steel. Low flow
More Information
Model Number C14311BBD1F
Series SSPC Centrifugal Pumps Stainless Steel
Max Flow (GPM.) 29
Max Flow GPH 1740
Minimum Flow (GPM.) 2.0000
TDH Maximum (Ft) 65
TDH Maximum (PSI) 28
TDH BEP (FT.) 51.0000
Horse Power (HP) 1/2
Horsepower (IE .5, 1, 1.5, 20) 0.5000
Inlet Connection Type FNPT
Inlet (In.) 1.25
Outlet Connection Type FNPT
Outlet (In.) 1
Wetted Materials 304SS
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115/230
Voltage (Range) 110-120/220-240
Phase (Ø) Single (1)
Motor Frequency 60/5
Motor Amps (A) 8.2/4
Motor ODP
Speed (RPM.) 3450
Motor Frame 56J thrd
Self Priming No
Max Operating Temperature (F) 220
Viscosity Vegetable Oil 34.60 cp 200.00 ssu
Shaft 304SS
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Impeller Size (IN.) 4.3800
Other Dishwashing Machines, Commerical Laundry, Chillers, Mold Cooling, Water Circulation
Drain Yes
Port Rotation No
Weight (Lbs) 29.000000
>