Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Finish Thompson Pumps (FTI)
FTI DB7 pump
DB7P-M226
$1,396.00Introducing the DB Series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics technology, the DB Series packs all the high-pressure, ...
1/2HP 115/230v PolyPro Learn More -
Finish Thompson Pumps (FTI)
DB Magnetic pump
DB10P-M218
$1,681.00Magnetic coupled pump. Introducing the DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, the DB serie...1HP 115/230v Polypro Learn More -
Finish Thompson Pumps (FTI)
FTI DB11 Magnetic coupled pump
DB11P-M216
$2,520.95Magnetic coupled pump.
- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation...
2HP 115/230v PolyPro Learn More -
Finish Thompson Pumps (FTI)
FTI DB8 pump
DB8P-M226
$1,145.28Magnetic coupled pump. Introducing the DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, the DB serie...1/2HP 115/230v Learn More -
Finish Thompson Pumps (FTI)
FTI DB8 pump
DB8V-M226
$1,443.56FTI DB8 Kynar pump is Magnetic coupled sealless. DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, th...1/2HP 115/230v TEFC Kynar Learn More -
Finish Thompson Pumps (FTI)
FTI Magnetic pump Kynar
DB15V-4-M208
$4,410.82DB15V-4-M208: FTI Magnetic coupled pump. Finish Thompson line of chemical handling pumps featuring their state of the art sealless design- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%...
3HP, 1phase Learn More -
Little Giant Pumps
TE-5-MD-SC
584504
$1,228.98The Little Giant MD-SC series features leakproof, seal-less magnetic drives and are designed for in-line, non submersible use. Volute, magnet housing and impeller are glass-filled polypropylene for excellent chemical resistance. Ceramic shaft a... -
Little Giant Pumps
TE-5.5-MD-SC chemical pump
585504
$1,395.20Magnetic Drive chemical Pump 115V / 230V 525 watts. The magnetic drive pump design consists of a cylindrical drive magnet attached to the motor shaft which rotates around a chemically resistant plastic separator housing. Inside this housing is ...
1/3HP TEFC 115/230v PP Learn More -
Little Giant Pumps
TE-5.5-MD-HC chemical pump
585604
$1,451.06Ryton Magnetic Drive chemical Pump, Highly Corrosive. 115V / 230V 525 watts. The magnetic drive pump design consists of a cylindrical drive magnet attached to the motor shaft which rotates around a chemically resistant plastic -Ryton separator ...
1/3HP TEFC 115/230v Ryton Learn More -
Finish Thompson Pumps (FTI)
Magnetic coupled pump Polypro
DB15P-6P-M206
$2,348.43Finish Thompson - DB15P-6P-M206: Chemical process Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-co...
1-1/2HP 115/230v Learn More
