DB Magnetic pump
-
Model Number:
DB10P-M218
-
Product Name:DB Magnetic pump
-
Manufacturer:
-
Series (35 Models):
1HP 115/230v Polypro
Model Number
DB10P-M218
$1,933.15
Finish Thompson (FTI) DB10P-M218
Magnetic coupled pump. Introducing the DB series magnetic drive
pump—the new standard for high hydraulic efficiency
and corrosive fluid handling. With computer design-aided magnetic
flux and computational fluid dynamics technology, the DB series
packs all the high-pressure, fluid-handling punch
you’d expect from a Finish Thompson pump.
DB Magnetic Chemical Pump, sealless magdrive pump like no other.
- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation with IEC motor with base
- Back pullout design
- Mounts to NEMA and IEC motor frames with feet
- Replaceable shaft
- ISO 1940 G2.5 balancing
- CE certified/ATEX available
- Working pressure up to 90 psi (6.2 bar) or 50 psi (3.5 bar) with Gylon® gasket
- Specific gravity over 1.8
- Viscosity up to 150 cP
- Polypropylene—180o F (82o C)
Used for: Chemical processing, Plating, Water and wastewater, Large Aquariums, Electronics,Pharmaceuticals, Wet scrubber, Pulp and paper, Heat exchanger
| Model Number | DB10P-M218 |
|---|---|
| Series | DB Magnetic Chemical Pump FTI |
| Max Flow (GPM.) | 90 |
| Max Flow GPH | 5400 |
| TDH Maximum (Ft) | 52 |
| TDH Maximum (PSI) | 22 |
| TDH BEP (FT.) | 44.000000 |
| Horse Power (HP) | 1 |
| Horsepower (IE .5, 1, 1.5, 20) | 1.0000 |
| Inlet Connection Type | FNPT |
| inlet size | 1 ½" |
| Inlet (In.) | 1.5 |
| Outlet Connection Type | MNPT |
| Outlet (In.) | 1.5 |
| Wetted Materials | PolyPro-GF |
| Elastomers / O-ring | FKM |
| Voltage (V) | 115/230 |
| Voltage (Range) | 110-120/220-240 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | TEFC |
| Speed (RPM.) | 3450 |
| Motor Frame | 56C |
| Self Priming | Yes |
| Max Operating Temperature (F) | 80 |
| Max Specific Gravity | 1.000000 |
| Max Particle Size (In) | .1 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | FRP |
| Mechanical Seal | No |
| Mechanical Seal Type | Single |
| Motor Bearings | Ball |
| Impeller Number (In.) | 1 |
| Coupling | Y |
| Approvals | CARB, ETL, SSPMA |
| Rotation | cw |
| Pump Bearing | Rulon |
| Low Oil Shutdown | Yes |
| Impeller Material | plastic |
| Cord Length (Ft.) | 0 |
| Duty | Continouos |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 59.000000 |
| Warranty (YRS.) | 5 |
Supporting Docs
Supporting Docs
FTI is a leading world class pump manufacturer in Erie, PA. FTI has built its product lines around cutting edge design and manufacturing processes culminates in their having ISO certification.
