TE-5.5-MD-HC chemical pump
-
Model Number:
585604
-
Product Name:TE-5.5-MD-HC chemical pump
-
Manufacturer:
-
Series (11 Models):
1/3HP TEFC 115/230v Ryton
Model Number
585604
$1,451.06
Little Giant 585604
Ryton Magnetic Drive chemical Pump, Highly Corrosive. 115V / 230V 525 watts. The magnetic drive pump design consists of a cylindrical drive magnet attached to the motor shaft which rotates around a chemically resistant plastic -Ryton separator housing. Inside this housing is a magnet completely encapsulated in chemical resistant plastic, and is fixed to the impeller. The impeller is free to rotate on a ceramic spindle supported at both ends. Thrust washers are utilized as wear bearings. The washers are held captive and do not revolve, to prevent wear on the shaft. Since this setup has a magnetic coupling, it eliminates leakage compared to pumps with conventional shaft seals.
While no pump should run dry, the TE5.5MDHC has a unique design which allows it limited dry run. See owners manual for details. designed for circulation of acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other special fluids, for use in environments such as hospitals, chemical companies, photo labs, dry cleaning plants, car washes, machine shops, laboratories, manufacturing plants and print shops.
- 2850/3450 RPM
- 115V: 5.6/5.0 amps
- 230V: 2.8/2.5 amps
- 340/525 Watts
| Model Number | 585604 |
|---|---|
| Series | MD-SC Mag drive Semi-Corrosive Chemical Pump |
| Max Flow (GPM.) | 32 |
| Max Flow GPH | 1920 |
| TDH Maximum (Ft) | 42 |
| TDH Maximum (PSI) | 18 |
| Horse Power (HP) | 1/3 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.3300 |
| Watts | 525.000000 |
| Inlet Connection Type | FNPT |
| inlet size | 1" |
| Inlet (In.) | 1 |
| Outlet Connection Type | MNPT |
| Outlet (In.) | 0.75 |
| Wetted Materials | Ryton-PPS GF |
| Elastomers / O-ring | FKM |
| Voltage (V) | 115/230 |
| Voltage (Range) | 110-120/220-240 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 50/60 |
| Motor | TEFC |
| Speed (RPM.) | 3450 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 180 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | Ceramic |
| Length (In.) | 11.000000 |
| Mechanical Seal | No |
| Motor Bearings | Ball |
| Other | This pump can be used for a wide range of material handling. Capable of handling highly corrosive materials. Consult chemical resitance guide.(Not for use with gasoline, fuel oils, or straight chlorine!) Split phase motor with overload, must be wired in field. |
| Pump Bearing | Carbon |
| Impeller Material | Ryton |
| Cord Length (Ft.) | 0 |
| Duty | Continuous |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 27.000000 |
| Warranty (YRS.) | 1 |
Supporting Docs
Supporting Docs
You May Be Interested In
