My Cart

Tsurumi Submersible Pump

2" 180GPH 1/2HP 230v
Model Number
HS2.4S-62-230
$335.00
Tsurumi Submersible Pump HS2.4s

Tsurumi HS2.4S-62-230

230v Tsurumi Submersible Sand Trash Pump. Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly by removing only 3 nuts. Used to dewater flooding basements, yards and other bodies of water with sand. Used in vapor honing or vapor blasting machines. 20Ft power cord. HS2.4S-62. 3000+ GPH. Automatic modes have "Z" in model.

  • Built in shaft mounted AGITATOR for suspends solids
  • Urethane Semi Vortex Impeller maximum durably and maintaining pump performance.
  • Double Inside Mechanical Seal with Silicon Carbide faces provides the longest operation life.
  • Oil Lifter provides lubrication of the seal faces.
  • V-Ring Seal Protector protects mechanical seal from abrasive particles.
  • See Residue kit for floor level pumping HS-RK under accessories.

replace wacker pst2

Click here to view another pump option for low level (LSC1.4S-61)
  • 2 Year warranty

Order float control if needed as accessory.

See Product Details TAB for further details.

 
 

 

More Information
Model Number HS2.4S-62-230
Series HS Sand / Solids Submersible Trash Pump
Max Flow (GPM.) 53
Max Flow GPH 3180
TDH Maximum (Ft) 39
TDH Maximum (PSI) 17
Horse Power (HP) 1/2
Horsepower (IE .5, 1, 1.5, 20) 0.5000
Watts 400.000000
Outlet Connection Type MNPT
Outlet (In.) 2
Wetted Materials 304SS, Epoxy coated
Elastomers / O-ring Urethane
Voltage (V) 230
Voltage (Range) 220-240
Phase (Ø) Single (1)
Motor Frequency 60
Motor Amps (A) 2.7
Motor Hermetically Sealed
Speed (RPM.) 3450
Max Operating Temperature (F) 180
Max Particle Size (In) .37
Viscosity Milk 3.20 cp 40.00 ssu
Length (In.) 13.0000
Mechanical Seal Face SiC
Mechanical Seal Type Double
Motor Bearings Ball
Other Max. Diameter (inch) : 10 1/16, Max. Height (inch): 12 15/16. Continuous Running Water Level (inch): 3 1/2 ETL Certified to UL CSA standards for submersible construction pumps. Double shielded, permanently lubricated, high-temp C3 with B-10 life of 60,000 hours. Min. generator size 1300 Watts. Starting current 6.2A.
Approvals ETL
Impeller Material Urethane, semi-vortex
Cord Size 16/3
Cord Length (Ft.) 20
Duty Continuous
Country of Manufacture Japan
Weight (Lbs) 35.000000
Warranty (YRS.) 2
GPM Of Water At 15 Feet Of Head 40
GPM Of Water At 20 Feet Of Head 35
GPM Of Water At 25 Feet Of Head 28
GPM Of Water At 30 Feet Of Head 20
>
As a pioneer in the submersible pumps, Tsurumi Pump is contributing to the people all over the world by supplying the products that always support people’s lives such as submersible pumps for wastewater and construction, centrifugal pumps, vacuum pumps, and water treatment equipment, etc. and also by offering technologies that control and protect water.