My Cart

Trash Pump 9HP Honda FTSP-3HRF

9HP Honda
Model Number
90281009 (FTSP-3HRF)
$7,363.00
Franklin_90281009 (FTSP-3HRF) trash pump
TSP Trash Pump. Honda gas engine GX270. Fast self priming ductile iron trash pump series; comparable in weight to aluminum pumps. Ideal for portable trash pumping, bentonite mixing and hydro-seeding applications. Handles spherical solids up to half the diameter of the suction hose. The pump casing is built of cast ductile iron for durability.
  • SEAL #305463095- Siliconized Graphite corrosion and abrasion resistant, water lubricated, no maintenance required, on a replaceable sleeve, protecting engine shaft.
  • PRIMING PLUG - Enables priming without the removal of the discharge hose.
  • IMPELLER - Semi-open cast gray iron, two vane type, for higher efficiency, capable of handling spherical solids trash.
  • DIFFUSER - Ductile iron, replaceable, with built-in wear plate.
  • CHECK VALVE - Built-in with threaded NPT suction inlet, prevents syphoning, facilitates priming.
  • CASING - Rugged ductile iron construction for high impact resistance and long life. 60,000 lb tensile strength ductile iron compares to 30,000 lb tensile strength cast iron and die cast aluminum which can be as low as 20,000 lb tensile strength.
  • SUCTION STRAINER - Price of pump includes a suction strainer, designed to pass solids of size that can be handled by the pump, giving an unobstructed flow.
  • FRONT COVER - Ductile iron construction - easy removal by four wing nuts, no wrenches required.
  • DRAIN PLUG - Enables casing to be drained, for winterizing, prevents frost damage.
  • ROLL FRAME - Sturdy welded roll frame
  • SOLIDS HANDLING: TSP-3 = 1-1/2”
  • ENGINE: Honda
TSP-3
More Information
Model Number 90281009 (FTSP-3HRF)
Series Trash Pumps Diesel Gas Engine Self Priming
Max Flow (GPM.) 310
Max Flow GPH 18600
TDH Maximum (Ft) 75
TDH Maximum (PSI) 33
Horse Power (HP) 9
Horsepower (IE .5, 1, 1.5, 20) 9.0000
Inlet Connection Type FNPT
inlet size 3"
Inlet (In.) 3
Outlet Connection Type FNPT
Outlet (In.) 3
Wetted Materials Cast Iron
Elastomers / O-ring Buna-Nitrile
Motor Gas Engine
Speed (RPM.) 3450
Self Priming Yes
Suction Lift (FT.) 25
Max Operating Temperature (F) 110
Viscosity Vegetable Oil 34.60 cp 200.00 ssu
Mechanical Seal No
Mechanical Seal Face SiC
Mechanical Seal Type Single
Other 1-2 hrs run.
GPM of Water @ 30 Ft. of Head 318 ; GPM of Water @ 40 Ft. of Head 265 ; GPM of Water @ 50 Ft. of Head 172 ; GPM of Water @ 60 Ft. of Head 90 ; GPM of Water @ 70 Ft. of Head 42
Rotation clockwise viewed from engine side
Low Oil Shutdown Yes
Impeller Material Cast Iron, non-clog
Duty Continuous
Drain Yes
Port Rotation No
Country of Manufacture United States
Weight (Lbs) 159.000000
Warranty (YRS.) 1

Supporting Docs

Supporting Docs
pdf
(Size: 593.91 KB) Extension: pdf