My Cart

Sump pump Pro grade 1HP

1HP 115v
Model Number

Pro Series S3100-DFC2 PHCC

PHCC Sump pump Pro grade 1HP. Industrial grade pumps for the residential market.

Pro Series submersible pumps. Sump pump, submersible dewatering pump, effluent pump. Not all sump pumps are created equal! Includes dual float switch. Dim. 18.1"H x 10.43"DFeatures

  • Continuous duty construction
  • Cast iron and stainless steel housing with primed and double baked paint
  • 5520GPH @ 10FT
  • Stainless steel shaft
  • Upper and lower ball bearings
  • Dual carbon ceramic seals
  • Dynamically balanced cast iron impeller
  • Stainless steel fasteners
  • Removable strainer
  • 20' cord length
  • Includes Deluxe Float Controller patent pending
  • Energy efficient - Pumps 4gal / watt hour (G/Wh)
Until now there have been three varieties of float switches: vertical, tethered and pressure. Unfortunately, all three of these switches are subject to various forms of failure. Now a float has been created with redundant switches to eliminate these problems. The Dual Float has, not one, but two floats mounted within a protective cage. Should one float fail to operate, the second float is available and ready to activate the pump. The protective cage prevents debris or other wires from interfering with movement of the floats.

Deluxe controller monitors power conditions and sounds an alarm when:- AC power is out or circuit breaker is tripped- Float has been raised for more than 10 minutes indicating service is needed- 9-volt battery needs replacement Deluxe DualFloat Level Switch

More Information
Model Number S3100-DFC2 PHCC
Series Pro Series submersible pumps
Max Flow (GPM.) 96
Max Flow GPH 5760
TDH Maximum (Ft) 52
TDH Maximum (PSI) 22
Horse Power (HP) 1
Horsepower (IE .5, 1, 1.5, 20) 1.0000
Outlet Connection Type FNPT
Outlet (In.) 2
Wetted Materials 416SS, Cast Iron
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor Amps (A) 11.5
Motor Hermetically Sealed
Speed (RPM.) 3450
Max Operating Temperature (F) 104
Viscosity Milk 3.20 cp 40.00 ssu
Shaft 416SS
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Double
Motor Bearings Ball
Other The Dual Float switch:
  • offers float switch redundancy, a primary float and a backup
  • prevents debris or wires from interfering with float operation by encasing them within a protective cage
  • adjusts to any activation level
  • provides ultimate security and peace of mind
  • includes a hose clamp to secure the float switch to the discharge pipe
3-year warranties when the pumps are used in intermittent applications.
Approvals CSA
Impeller Material Cast Iron, semi-open
Cord Length (Ft.) 20
Duty Continuous
Weight (Lbs) 46.000000
Warranty (YRS.) 3 - 5
GPM Of Water At 15 Feet Of Head 82
GPM Of Water At 30 Feet Of Head 60
GPM Of Water At 40 Feet Of Head 35

Supporting Docs

Supporting Docs
(Size: 1.04 MB) Extension: pdf