My Cart

1HP Submersible pump

  • Manufacturer:
  • Product Name:
    1HP Submersible pump
  • Model Number:
1HP 115v 4400GPH Vertical switch
Model Number
E7105 1hp submersible sewage pump

Pro Series E7105-VS

Sewage Pump 1HP with Vertical switch. 4400 GPH @ 10 Ft.

Pro Series submersible pumps. Sump pump, submersible dewatering pump, effluent pump. Not all sump pumps are created equal! Select level switch like the Ultimate sensor switch and deluxe controller USC3 DFC2 separately. See link below for full details about this extraordinary level switch.

Pump is strong and dependable. Features

  • Continuous duty construction
  • Cast iron housing
  • Capacitor start
  • Stainless steel shaft
  • Upper and lower ball bearings
  • Dual carbon ceramic seals with additional third shaft seal
  • Dynamically balanced cast iron impeller
  • Stainless steel fasteners
  • Stainless steel removable strainer
  • 10' cord length
  • Can use any float switch
  • Energy efficient PSC motor

Until now there have been three varieties of float switches: vertical, tethered and pressure. Unfortunately, all three of these switches are subject to various forms of failure. Now a solid-state sensor has no moving parts to wear out or break. Itç—´ simply a monitoring sensor rod. When the water level touches the rod, the sensor detects it and activates the pump. Has 9-volt battery backup for alarm.

10 second time delay (adjustable) off for low level. This allows pump down. Ultimate Sensor
More Information
Model Number E7105-VS
Max Flow (GPM.) 94
Max Flow GPH 5640
TDH Maximum (Ft) 32
TDH Maximum (PSI) 15
Horse Power (HP) 1
Horsepower (IE .5, 1, 1.5, 20) 1
Outlet Connection Type FNPT
Outlet (In.) 2
Wetted Materials CI-SS
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor Amps (A) 6.3
Motor Hermetically Sealed
Speed (RPM.) 1750
Max Operating Temperature (F) 104
Max Particle Size (In) 2.0000
Viscosity Vegetable Oil 34.60 cp 200.00 ssu
Shaft 416SS
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Double
Motor Bearings Ball
Other 3Yr warranty is for intermitant use ie as a sump pump, not a fountain.
Order level switch if needed separately. 9"W x 5-7/8"D x 20"H
Approvals CSA
Impeller Material Cast Iron, non-clog
Cord Length (Ft.) 10
Duty Continuous
Weight (Lbs) 41.000000
Warranty (YRS.) 3
GPM Of Water At 10 Feet Of Head 74
GPM Of Water At 15 Feet Of Head 50

Supporting Docs

Supporting Docs
(Size: 1.04 MB) Extension: pdf