My Cart

Submersible "Non-Clog" Pump 8"

460v/3P 48HP 8"
Model Number
8BSE48046HLDS
$25,930.00
Barmesa_8BSE submersible pump 8BSE36063HLDS

8" Submersible Sewage "Non-Clog" Pump. Heavy duty sewage ejector pump with double SiC oil filled shaft seal. Uses include commercial sewage, loading docks and other wastewater pits where a non-clog 6" submersible pump is needed with high flow. 8" Horizontal Discharge Solids Handling Pump. 8" horizontal discharge handles up to 3" spherical solids. For use in municipal lift stations, treatment plants and industrial waste applications. Motor sizes from 36 to 48HP. Capacities to 3500 gpm Heads to 65 ft. 62170352

  • DISCHARGE 8" 125LB ANSI Flange.
  • LIQUID TEMPERATURE 104° F (40° C) continuous.
  • VOLUTE Cast iron ASTM A-48 class 30.
  • MOTOR HOUSING Cast iron ASTM A-48 class 30.
  • SEAL PLATE Cast iron ASTM A-48 class 30.
  • IMPELLER Design: 3 vane, closed.
  • IMPELLER Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3.
  • SHAFT 416 series stainless steel.
  • O-RINGS Square shaped Buna-N.
  • PAINT Air dry enamel, water based.
  • SEAL Design:Double SiC, mechanical, oil filled chamber.
  • SEAL Material : Silicon carbide outboard, with stainless steel hardware.
  • HARDWARE 300 series stainless steel.
  • CORD ENTRY 25 ft of neoprene cord SJTOW 2/3, sealed against moisture.
  • MOISTURE SENSOR Normally open included.
  • TEMPERATURE SENSOR Normally closed included.
  • BEARINGS Upper: ball, single row, oil lubricated, for radial load. Lower: ball, single row, oil lubricated, for radial and thrust load.
  • MOTOR NEMA B, 60 Hz, 1150 RPM, oil filled, with overload protection in motor.
  • PUMP OPERATION Manual, does not include level control. See Options
  • OPTIONAL EQUIPMENT Additional cord and slide rail coupling (SRC-2).
More Information
Model Number 8BSE48046HLDS
part number 62170323
Series Barmesa Industrial Pumps
Max Flow (GPM.) 3500
Max Flow GPH 210000
TDH Maximum (Ft) 60
TDH Maximum (PSI) 26
Horsepower (IE .5, 1, 1.5, 20) 48
Outlet Connection Type Flange
Outlet (In.) 8
Wetted Materials Cast Iron
Elastomers / O-ring Buna-Nitrile
Voltage (V) 460
Voltage (Range) 460-480
Phase (Ø) Three (3)
Motor Frequency 60-50
Motor Amps (A) 45
Motor Hermetically Sealed
Speed (RPM.) 1150
Self Priming ----
Max Operating Temperature (F) 104
Max Particle Size (In) 3
Viscosity SAE 10 oil 88.00 cp 500.00 ssu
Mechanical Seal OIL FILLED
Mechanical Seal Face SiC
Mechanical Seal Type Double
Impeller Size (IN.) 12.5
Other PumpBiz offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.
Approvals CSA
Impeller Material open, double vane. cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3.
Motor Locked Rotor Amps (A.) 217
Cord Size 2/3
Cord Length (Ft.) 25
Country of Manufacture Mexico
Weight (Lbs) 928.000000
Warranty (YRS.) 1
GPM Of Water At 30 Feet Of Head 3100
GPM Of Water At 40 Feet Of Head 2600
GPM Of Water At 50 Feet Of Head 2000
>
Barmesa Pumps LLC started operations in 1953, manufacturing small self-primer pumps, jet pumps and end suction centrifugal pumps for the rural market.

During the 1970's, new additions were made to the line of products and we started manufacturing submersible solids handling pumps as well as grinder pumps.

Today after more than 60 years, we have manufacturing facilities & distribution centers across America, and an extensive distributor network. Our State of the Art manufacturing facilities have modern CNC machinery as well sophisticated design and test capabilities. Barmesa serves markets such as marine, commercial, municipal, wastewater, water, industrial, construction, utility, chemical, OEM, irrigation, dewatering flood control, fire protection, as well as many other applications.

Our privately held family business is committed to offer an extensive variety of products with the best quality standards and on-time deliveries. We are proud to say "Quality Pumps Since 1953".