Dog Bath Pump
-
Model Number:
Dog Bathing Pump System
-
Product Name:Dog Bath Pump
-
Manufacturer:
-
Series (15 Models):
PumpBiz Dog Bathing Pump System
Dog Bathing Pump System-HoundWash
Gentle. Powerful. Professional.
Whether your dog loves to run on the beach, take a swim, or just needs regular maintenance to stay clean and beautiful, the HoundWash Dog Bathing Pump System is the solution you’ve been looking for.
This commercial-duty, portable recirculating bathing system is built to clean even the dirtiest dogs—gently yet thoroughly. Designed to fit most dog grooming tubs, it offers the same powerful performance as other systems that cost hundreds of dollars more.
Key Features:
- Powerful Cleaning with a Gentle Touch
The included diffuser nozzle with twist-adjust control delivers a customizable, powerful spray that eliminates the need for hand scrubbing. - Efficient 2–20 GPM Submersible Pump
High cleaning pressure with only a few gallons of warm water. Great for quick, deep cleans while saving water. - Hands-Free Operation
Comes with a UL-recognized foot pressure On/Off switch for convenient, hygienic, and safe control. - Safe and Built to Last
- 115V pump with GFCI shock protection (UL recognized)
- 8 ft. heavy-duty molded PVC hose
- 10 ft. power cord
- Garden hose adapter included
- Low center of gravity to prevent tipping
- Screened inlet prevents clogging
- Epoxy-coated aluminum housing with carry handle
Recirculating Bathing System – How It Works:
The electric pump draws water from inside the tub and uses it to clean the pet.
- First add enough water to the bottom of the tub to reach the intake on the pump (about 2 to 3 gallons depending on tub size)
- Add a capful or two of shampoo.
- The low level screend inlet will then draw the water out of the bottom of the tub, circulate it through the bathing system, and send it back out through the spray hose under pressure.
- The high powered mix of shampoo and water will help to quickly saturate and clean pet coats. It also keeps the dirt and oils in suspension in the water, so they don't redeposit onto the coat.
- When done, rinse with clean water—no wasted shampoo or unnecessary runoff.
The two main advantages of the recirculating system is that it will save you on shampoo and money. Since you are cleaning a pet using a closed system of shampoo and water, you aren't seeing good suds or wasted water go sailing down the drain.
Perfect For:
- Professional dog groomers
- Pet shows and mobile groomers
- Home users looking for professional-quality results
Why Choose HoundWash?
- Saves water and shampoo
- Minimizes back and neck strain for the groomer
- Cleans faster and more effectively
- Submersible design means no need for a separate tank
- Made for durability and ease-of-use
Want an all-in-one solution? Check out the HoundWash Station, a complete dog bathing setup designed to reduce back stress and lower neck pain while increasing grooming efficiency.
HoundWash – Making Pet Washing a Lot Easier
Bring out your dog’s youthful glow with a system that offers a deep-cleansing, high-pressure massage, all while saving time and effort
| Model Number | Dog Bathing Pump System |
|---|---|
| Series | HoundWash |
| Max Flow (GPM.) | 20 |
| Max Flow GPH | 1200 |
| TDH Maximum (Ft) | 26 |
| TDH Maximum (PSI) | 11 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.1700 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 1 |
| Wetted Materials | Aluminum, PVC |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 1725 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 120 |
| Viscosity | Water 1.00 cp 31.00 ssu |
| Shaft | 304SS |
| Mechanical Seal | LIP |
| Mechanical Seal Type | Single |
| Other | Caution: Pump MUST be used with a Ground Fault Circuit Interupter GFCI to prevent possible electrical shock. UL approved. Dim's: 5.87"L x 4.25"W x 8.62"H. High flex hose system that will not tip the pump over. Low water level is not a problem with these pumps, work in as low as 1/8" deep. Oil filled aluminum motor housing means long life in commercial applictions. |
| Impeller Material | Plastic |
| Cord Length (Ft.) | 10 |
| Duty | Continuous |
| Country of Manufacture | United States |
| Weight (Lbs) | 20.000000 |
| Warranty (YRS.) | 90 days |





