My Cart

Kynar magdrive pump

230/460v
Model Number
TE-6K-MD 3PH 1/2HP
$1,027.00
march te-6k 3-phase pps

March TE-6K-MD 3PH 1/2HP

Kynar magdrive pump, Magnetic Coupled Pump .5 Hp.

PVDF Impeller 3.125. Magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide overload protection. The impeller magnet assembly floats in the radial magnetic field set up by the motor driven external drive magnet. The impeller is designed to deliver the maximum flow & pressure utilizing the available strength of the synchronized magnets. The standard diameter impeller is suitable for water-like liquids to 1.1 specific gravity. Liquids having a higher specific gravity can be pumped if the overall diameter of the impeller is reduced, the outlet flow is restricted, or the restrictions from a filter or other head loss is sufficient to keep the impeller magnet in synchronization.

for ordering impeller trims click here 

All Kynar pumps which had been constructed using Carbon Filled Kynar are being switch to Glass Filled Kynar. The Carbon Filled Kynar is black in color. The Glass Filled Kynar is yellow. The most important reason for this change is the Glass Filled Kynar has a higher resistance to Sodium Hypochlorite then the Carbon Filled. The manufacturer of Kynar, Arkema, has tested the plastic with 20% Sodium Hypochlorite at 194F for 30 days and found no damage to the plastic. March has conducted its own testing, testing the parts at 14% Sodium Hypochlorite for the last 2 months at ambient, and no damage has been detected. March has also conducted pressure and temperature testing, and the Glass Filled Kynar meets or exceeds the Carbon Filled Kynar it is replacing. The Glass Filled Kynar also has the following certifications, FDA Food Compliant, 3A, USP Class VI, V-0, and NSF 61 

When repairing or replacing, the front and rear housings must be the same material as each other. Do not mix and match the housings. The impeller, of either material, will fit in both the Glass Filled Kynar and Carbon Filled Kynar housings. Instead of changing part numbers for the new material, the part numbers for the Carbon Filled Kynar parts now call for Glass Filled Kynar. If it is necessary for you to have Carbon Filled Kynar.

More Information
Model Number TE-6K-MD 3PH 1/2HP
part number 0153-0002-0500
Series March pump 6 Mag Drive Sealless 38gpm
Max Flow (GPM.) 34
Max Flow GPH 2040
TDH Maximum (Ft) 50
TDH Maximum (PSI) 22
Horse Power (HP) 1/2
Horsepower (IE .5, 1, 1.5, 20) 0.5000
Inlet Connection Type FNPT
inlet size 1"
Inlet (In.) 1
Outlet Connection Type MNPT
Outlet (In.) 0.75
Wetted Materials Kynar-PVDF CF
Elastomers / O-ring FKM
Voltage (V) 230/460
Voltage (Range) 220-240/460-480
Phase (Ø) Three (3)
Motor Frequency 50/60
Motor TEFC
Speed (RPM.) 3450
Motor Frame 56C
Self Priming No
Max Operating Temperature (F) 200
Viscosity Water 1.00 cp 31.00 ssu
Shaft Ceramic
Mechanical Seal No
Pump Bearing Carbon/graphite
Drain No
Port Rotation No
Country of Manufacture United States
Weight (Lbs) 34.000000

Supporting Docs

Supporting Docs
pdf
(Size: 62.08 KB) Extension: pdf
pdf
(Size: 536.92 KB) Extension: pdf
pdf
(Size: 550.92 KB) Extension: pdf

March Pump – Originator of the Centrifugal Sealless Magnetic Drive Pump

US Manufacturer Of Centrifugal Sealless Magnetic Drive Pumps for Chemical, Industrial, Medical, Marine, Solar and OEM applications.

Flows from 1/2 gpm to 200 gpm
Heads up to 160 feet
Available in plastic and metallic construction
AC, DC, Explosion Proof, and Air Motors
Submersible and Non-Submersible

March Pump Parts list