My Cart

FTI Magnetic pump Kynar

2HP 230/460v
Model Number
DB15V-4-M215
$3,609.90
Finish Thompson DB15V-4-M215 FTI Magnetic  pump Kynar
DB15V-4-M215: FTI Magnetic coupled pump. Finish Thompson line of chemical handling pumps featuring their state of the art sealless design
  • Five-year warranty
  • Extended run dry ability (with carbon bushing)
  • High operating efficiency —Up to 70%
  • Polypropylene or PVDF construction
  • Powerful neodymium magnets
  • Close-coupled design
  • Horizontal or vertical installation with IEC motor
  • Back pullout design
  • Mounts to NEMA and IEC motor frames
  • Replaceable shaft
  • ISO 1940 G2.5 balancing
  • CE certified/ATEX available
  • Working pressure up to 90 psi (6.2 bar) or 50 psi (3.5 bar) with Gylon® gasket
  • Specific gravity over 1.8
  • Viscosity up to 150 cP
  • Polypropylene—180o F (82o C)
  • PVDF—220o F (104o C)

Used for: Chemical processing, Plating, Water and wastewater, Electronics,Pharmaceuticals, Wet scrubber, Pulp and paper, Heat exchanger

More Information
Model Number DB15V-4-M215
Series DB Magnetic Chemical Pump FTI
Max Flow (GPM.) 120
Max Flow GPH 7200
TDH Maximum (Ft) 72
TDH Maximum (PSI) 31
Horse Power (HP) 2
Horsepower (IE .5, 1, 1.5, 20) 2.0000
Inlet Connection Type FNPT
Inlet (In.) 2
Outlet Connection Type MNPT
Outlet (In.) 1.5
Wetted Materials PVDF-Kynar
Elastomers / O-ring Viton
Voltage (V) 208-230/460
Voltage (Range) 208-240/460
Phase (Ø) Three (3)
Motor Frequency 50-60
Motor TEFC
Motor Frame 56C
Self Priming No
Max Operating Temperature (F) 220
Viscosity Milk 3.20 cp 40.00 ssu
Mechanical Seal No
Rotation CW motor side
Pump Bearing Carbon/graphite
Impeller Material Kynar, closed
Cord Length (Ft.) 0
Drain Yes
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 57.000000
Warranty (YRS.) 5
GPM Of Water At 40 Feet Of Head 110
GPM Of Water At 60 Feet Of Head 80
GPM Of Water At 70 Feet Of Head 60

Supporting Docs

Supporting Docs
pdf
(Size: 1.55 MB) Extension: pdf
FTI is a leading world class pump manufacturer in Erie, PA. FTI has built its product lines around cutting edge design and manufacturing processes culminates in their having ISO certification.