Magnetic centrifugal pump
-
Manufacturer:
-
Series (37 Models):
-
Product Name:Magnetic centrifugal pump
-
Model Number:SP22P-M238
7.5hp, 230/460/3ph
Finish Thompson (FTI) SP22P-M238
SP Series Magnetic Drive Self-Priming Pumps are the product of
advanced engineering CFD design software and superior magnetic flux
technology. The SP Series combines deep-lift capabilities and
lightning-fast priming with the advantages of neodymium magnetic
drive technology and corrosion resistant polypropylene and PVDF to
handle the most difficult applications with no seal replacement, no
leaks and the capability to run-dry without damage. Aquarium
Features:
- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency
- Easy set, measurement-free drive
- Polypropylene construction
- closed impeller options
- Powerful neodymium magnets
- Close-coupled design
- Threaded connections
- Back pullout design
- Mounts to NEMA motor frames
- Replaceable shaft
- CE certified/ATEX available
- Working pressure up to 90 psi(6.2 bar)
- Up to 1.8 SG
- Viscosity up to 150 cP
- Polypropylene—180o F (82o C)
- PVDF—220o F (104o C)
Used for: Chemical processing, Plating, Water and wastewater, Electronics,Pharmaceuticals, Wet scrubber, Pulp and paper, Heat exchanger, DI water
| Model Number | SP22P-M238 |
|---|---|
| Series | DB Magnetic Chemical Pump FTI |
| Max Flow (GPM.) | 252 |
| Max Flow GPH | 15120 |
| TDH Maximum (Ft) | 175 |
| TDH Maximum (PSI) | 55 |
| Horse Power (HP) | 7 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | 7.5000 |
| Inlet Connection Type | FNPT |
| Inlet (In.) | 2 |
| Outlet Connection Type | MNPT |
| Outlet (In.) | 2 |
| Wetted Materials | PolyPro-GF |
| Elastomers / O-ring | FKM |
| Voltage (V) | 208-230/460 |
| Voltage (Range) | 208-240/460 |
| Phase (Ø) | Three (3) |
| Motor Frequency | 50-60 |
| Motor | TEFC |
| Speed (RPM.) | 3450 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 180 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | Ceramic |
| Mechanical Seal | No |
| Motor Bearings | Ball |
| Pump Bearing | Carbon/graphite |
| Impeller Material | PolyPro, closed |
| Cord Length (Ft.) | 0 |
| Duty | Continuous |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 85.000000 |
| Warranty (YRS.) | 5 |
Supporting Docs
Supporting Docs
FTI is a leading world class pump manufacturer in Erie, PA. FTI has built its product lines around cutting edge design and manufacturing processes culminates in their having ISO certification.
You May Be Interested In
