4" Hydraulic Stainless submersible trash pump
-
Model Number:
TP40S
-
Product Name:4" Hydraulic Stainless submersible trash pump
-
Manufacturer:
-
Series (4 Models):
4" Stainless
Model Number
TP40S
$2,500.00
HDI TP40S
4" Hydraulic Stainless submersible trash dredge pump
Hydraulic TP40 compact submersible trash pump is a light weight, efficient way to move large volumes of liquids that can contain sand, dirt and gravel very quickly. This submersible centrifugal design requires no priming and can run dry all day without damage. Great for dredge operations. Direct drive requires no maintenance as all moving parts are self lubricated with passing.
The TP40S has a 316 Stainless Steel Volute and Impeller as well as an anodized Motor Mount and Wear Plate. It is a compact submersible trash pump and is a light weight, efficient way to move large volumes of liquids that can contain sand, dirt and gravel very quickly.
Pump can handle the removal of water containing solids up to 30%+. It is perfect in the pumping sites of water, sand slurries, gravel and sludge on job sites. Optional dredge pickup tube inlet adapter available.
This submersible centrifugal design requires no priming and can run dry all day without damage. Direct drive requires no maintenance as all moving parts are self lubricated with passing hydraulic fluid. A durable steel bowl and ductile iron impeller and UHMW Wear Plate are very durable and capable of moving liquids containing up to 30% solids. If you are pumping oily sludge, septic systems, muddy trenches or even clean water this a pump for you. The TP40 is fitted with flush face couplers that threads directly into SAE ports, No NPT hydraulic joints to weep. The TP40 Trash Pump comes with a 3” male NPT output port fitted to a 4” Cam Loc fitting standard.
Hydraulic flow 7-11gpm up to 2000psi
Hydraulic motor must return into a open / non-pressurized reservoir open circuit. Back pressure on the discharge / return side of the hydraulic will damage shaft seal. Skid steer need to be aware of this.
Model Number | TP40S |
---|---|
Series | Hydraulic Submersible Trash Pumps |
Max Flow (GPM.) | 875 |
Max Flow GPH | 52500 |
TDH Maximum (Ft) | 45 |
Outlet Connection Type | Quick connect |
Outlet (In.) | 4 |
Wetted Materials | 316SS, Aluminum |
Motor | Hydraulic Motor |
Max Operating Temperature (F) | 104 |
Max Particle Size (In) | 3 |
Viscosity | Catsup 3000.00 cp 20000.00 ssu |
Mechanical Seal | No |
Other | Cast iron impeller and steel bowl. Able to run dry without damage. Hyd. System relief valve should be set at 2000psi. Porting: #10 SAE (Press.) #12 SAE (Ret). Connect Size and Type 1/2 in. Male Pipe (Press.) 3/4 in. Male Pipe (Ret).
19"x15"x19" |
Approvals | CE |
Impeller Material | Cast Iron, non-clog |
Country of Manufacture | United States |
Weight (Lbs) | 56.000000 |
>