MY CART 0item(s)

You have no items in your shopping cart.

PumpBiz remains OPEN as a essential business in providing pumps and parts to critical applications (Read more)

Product was successfully added to your shopping cart.
Barmesa_4BSE submersible pump Submersible  "Non-Clog" Pump flow chart Submersible  "Non-Clog" Pump dimensions
Barmesa_4BSE submersible pump

Scroll Down For Product Details

Manufacturer: Barmesa
Series (41 Models):

Barmesa Industrial Pumps

Product Name:

Submersible "Non-Clog" Pump

Model Number:


Gallons Per Hour: 42000 (700 GPM)
Voltage: 208-230
Horsepower: 11

Quick Overview

208/230v/3P 11.3HP

27% Off Regular Price: $6,282.00

Special Price $4,574.25


Submersible Sewage "Non-Clog" Pump. Heavy duty sewage ejector pump with Inboard oil filled shaft seal. Uses include residential / commercial sewage, loading docks and other pits where a non-clog submersible wastewater pump is needed with high flow. 4" Horizontal Discharge Solids Handling Pump 4" horizontal discharge handles up to 3" spherical solids. Motor sizes from 4 to 15HP Open and enclosed impellers, some with pump-out vanes on backside. Delta impellers available on some models Volutes available in both standard-efficiency concentric and high-efficiency scroll designs Capacities to 1265 gpm Heads to 258 ft. Replace Berkeley SW601200325MB 

  • DISCHARGE 4" 125LB ANSI Flange.
  • LIQUID TEMPERATURE 104ï½° F (40ï½° C) continuous.
  • VOLUTE Cast iron ASTM A-48 class 30.
  • MOTOR HOUSING Cast iron ASTM A-48 class 30.
  • SEAL PLATE Cast iron ASTM A-48 class 30.
  • IMPELLER Design: open, double vane.
  • IMPELLER Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3.
  • SHAFT 416 series stainless steel.
  • O-RINGS Square shaped Buna-N.
  • PAINT Air dry enamel, water based.
  • SEAL Design:Double, mechanical, oil filled chamber.
  • SEAL Material : Silicon carbide outboard, with stainless steel hardware.
  • HARDWARE 300 series stainless steel.
  • CORD ENTRY 25 ft of neoprene cord SJTOW 10/4, sealed against moisture.
  • MOISTURE SENSOR Normally open included.
  • TEMPERATURE SENSOR Normally closed included.
  • BEARINGS Upper: ball, single row, oil lubricated, for radial load. Lower: ball, single row, oil lubricated, for radial and thrust load.
  • MOTOR NEMA B, 60 Hz, 1750 RPM, oil filled, with overload protection in motor.
  • PUMP OPERATION Manual, does not include level control. See Options
  • OPTIONAL EQUIPMENT Additional cord and slide rail coupling (SRC-2).

Additional Information

Model Number 4BSE1133DS
part number 62170127
Series Barmesa Industrial Pumps
Warranty (YRS.) 1
Max Flow (GPM.) 700
Max Flow GPH 42000
TDH Maximum (Ft) 90
TDH Maximum (PSI) 39
Horsepower 11
Horse Power (HP) 11
Outlet Connection Type Flange
Outlet (In.) 4
Wetted Materials CI
Elastomers / O-ring Buna-Nitrile
Voltage (V) 208-230
Voltage (Range) 208-240
Phase (Ø) Three(3)
Motor Frequency 60
Motor Amps (A) 28
Motor Hermetically Sealed
Speed (RPM.) 1725
Max Operating Temperature (F) 104
Viscosity SAE 10 oil 88.00 cp 500.00 ssu
Mechanical Seal OIL FILLED
Mechanical Seal Face SiC
Mechanical Seal Type Double
Impeller Size (IN.) 9
Applications Dewatering, Sewage, Submersible, Sump
Other The moisture cord and /or temperature cord is size 18/5, type SO, 0.485"dia.
Keep flow rate below 680gpm or 40FT to avoid motor overload. Refer to performance curve.
Approvals CSA
Impeller Material open, double vane. cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3.
Motor Locked Rotor Amps (A.) 160
Cord Size 10/4
Cord Length (Ft.) 25
Country of Manufacture Mexico
Weight (Lbs) 421
Time to Ship (DAYS) 1 day
GPM Of Water At 15 Feet Of Head 70
GPM Of Water At 50 Feet Of Head 540
GPM Of Water At 60 Feet Of Head 400

Supporting Docs

Submersible  Submersible "Non-Clog" Pump Size: (342.01 KB) Extension: jpg
Submersible  Submersible "Non-Clog" Pump Size: (236.29 KB) Extension: jpg
California prop 65