Accessories
Pump accessories available include:
- Suction & Discharge hoses, Hose kits in several materials and ratings.
- Valves: Check one way, Foot valve, flow control in plastic, brass, bronze and Stainless
- Suction strainers: Barrel, Trash, Top / Bottom low level, Long narrow in both metal and plastic
- Hose fittings: Quck connect / Cam locks, Threaded couplings
- Motor Starters: UL listed NEMA 1 and 4X
- Motor base plates, shaft couplings
- Float Level Switches: Electro-mechanical, Solid state, alarms, Wi-Fi
- VFD motor control: Variable Frequency Drive allows speed control of the electric motor
-
PumpBiz
Adjustable Motor Base
B184T
$135.00This motor base simplify's mounting and belt tension adjustment at installation and during later maintenance checks. This is a heavy duty adjustable motor base manufactured of steel or plate. Detergent washed, painted with a dark gray primer and ...
-
PumpBiz
3/4" x 8' Discharge Hose
V-H1P
$31.00Neoprene Discharge hose 8 ft. for drum pumps V-110, V-110H and L-30A Bent spout on one end and 3/4" FNPT fitting on the other. -
Munro Pumps
Flow Sleeve & SS Stand
SA400FS&S125
$356.00According to the Picture:
- Submersible Pump & Motor: Installed in cistern at 15ï½° angle with flow sleeve to meet manufacturer's requirements.
- Check Valve: Holds system pressure from flowing back into cistern or main city line.
- Discharge Hose: NS...
-
Leeson Motors
TEFC C face Base 1PH
114146
$1,161.001HP..1725RPM.56. TEFC. 208-230/460V.3PH.60HZ 1.15SF .RIGID 56C Nema frame general purpose with capacitor start1HP 1725 3P Learn More -
Generic Pump
4" Foot Valve & Strainer
FV-4
$368.40Rugged cast iron construction, painted red; complete with strainer for pumping from ponds or streams, drainage on construction sites or in irrigation projects. Valve has leather flapper check to maintain prime (to be installed in vertical positio... -
Munro Pumps
6" PVC Foot Valve
FV600PVCS
$500.006" PVC plastic foot valves are made of high quality PVC and offer full port accessibility - no obstructions in the flow path. Used on the suction line of water pumps to hold prime and screen out debris.
Outlet is a slip / socket for solvent weldin...Slip Socket connection Learn More -
PumpBiz
1 1/2in Steel hose nipple
CNS-150
$9.00a 1 1/2" hose barb hose nipple. Used to connect a hose to the female inlet or outlet of a pump. Threads must use a sealant like Teflon tape or putty. Use one or two hose clamps on the hose. -
PumpBiz
1 1/4in Steel hose nipple
CNS-125
$8.001 1/4" hose barb hose nipple steel. Used to connect a hose to the female inlet or outlet of a pump. Threads must use a sealant like Teflon tape or putty.1.25MNPT x HB Learn More -
Jabsco Pumps
Hydro Air Bilge Switch
59400-0024
$55.00Hydro Air Bilge Switch (bubble switch) 24V. this hydro air unit uses air pressurerather then electric sensors like other switches. There are no moving parts tojam, and no electrical components need to be submerged (including the wires) -
Generic Pump
1.5" Foot Valve & Strainer
FV-1.5
$56.40Rugged cast iron construction, painted red; complete with strainer for pumping from ponds or streams, drainage on construction sites or in irrigation projects. Valve has leather flapper check to maintain prime (to be installed in vertical positio...
