Accessories
Pump accessories available include:
- Suction & Discharge hoses, Hose kits in several materials and ratings.
- Valves: Check one way, Foot valve, flow control in plastic, brass, bronze and Stainless
- Suction strainers: Barrel, Trash, Top / Bottom low level, Long narrow in both metal and plastic
- Hose fittings: Quck connect / Cam locks, Threaded couplings
- Motor Starters: UL listed NEMA 1 and 4X
- Motor base plates, shaft couplings
- Float Level Switches: Electro-mechanical, Solid state, alarms, Wi-Fi
- VFD motor control: Variable Frequency Drive allows speed control of the electric motor
-
Generic Pump
Adjustable Nozzle 1.5
FHF51715NPT
$64.00Adjustable thermoplastic fog to stream Nozzle. Size: 1 1/2" FNPS. Adjusts from a Straight Beam to Fog and Opens and Closes in a 30 Degrees Fog Pattern-up to 120 Degrees. ULC listed. 100psi rating and designed for water only.517-151 JAHN-150
-
Generic Pump
Sump Pump Discharge hose 1.5"x24'
FP150-24
$26.00Light weight corregated vinyl sump pump discharge hose, black. 1 1/2" ID x 24FT long. Includes 1 1/2" hose barb and SS hose clamp. -
Generic Pump
1 1/2" Hose Barb Elbow 90
58-1610 40
$9.00PolyPro, Glass reinforced, tempeture range 10ï½° to 180ï½°F150 Psi at 70ï½°Fgood chemical resistancePolyPro, Glass reinforced, tempeture range 10ï½° to 180ï½°F150 Psi at 70ï½°Fgood chemical resistance Learn More -
Generic Pump
2" Hose Barb 90
58-1611-40
$6.252" MNPT x 2" hose barb 90 degree elbow. Made from strong glass filled polypropylene. Straight is 58-1616-40. Do not use immediately at the suction side of a pump. Best to have 10-20" straight pipe run before the inlet of a pump due to the turbulen...2" MNPT x 2" hose barb 90 degree elbow. Made from strong glass filled polypropylene. Straight is 58-1616-40 Learn More -
Generic Pump
Adjustable Nozzle 2"
JAHN-200
$55.00Adjustable thermoplastic fog to stream Nozzle. Size: 2" FNPS. Adjusts from a Straight Beam to Fog and Opens and Closes in a 30 Degrees Fog Pattern-up to 120 Degrees. FM listed. 100psi rating and designed for water only.FHF5172NPT
Plastic 2" Learn More -
Generic Pump
Lawn controller 5hp PLUS
MPLCD2205
$890.005 HP pump controller PLUS*, single phase with 220/230 VAC contactor coil. Includes voltage & HP specific thermal protection for the motor and a terminal block. Includes pressure switch for mounting to pump discharge. Includes time delay rel... -
Generic Pump
Lawn controller 5hp
MPLC245
$587.00Lawn sprinkler pump controller 5hp
5 HP pump controller, single phase with 24 VAC contactor coil. 115 VAC / 230 VAC Includes voltage & HP specific thermal protection for the motor and a terminal block. Includes pressure switch for mounting to pum...
-
Generic Pump
2" Hose Discharge Manifold
2HOSEKIT
$51.00Each kit includes all the steel fittings needed to connect to a 1.5" pump discharge. Also included are priming plugs. A roll of teflon tape rounds out the packages to allow quick, leak-proof assembly.hose Learn More -
Generic Pump
2" x 5 ft Suction Hose Kit
SUCTION02
$59.00Consists of the same upper section of hose and connectors. The intake is covered by a 2" cadmium plated basket strainer with 1/8" holes attached by a threaded hose adapter, which is pneumatically clamped to the hose end. -
Generic Pump
1.5" Basket strainer
AP3TRHS150
$29.90Can be used with all makes of centrifugal pumps. An "open" area of 50% allows Cadmium Plated Strainers to filter out large damaging debris, yet permits sufficient water passage to keep pump functioning at full capacity.- Height: 3"
- Diameter:...
