My Cart

8" Self Priming Trash pump

8" Pedestal Trash
Model Number
8" self priming trash pump

Barmesa SH8-U

Self priming centrifugal solids handling pumps designed for Municipal and Industrial applications. For economical, trouble-free operation in handling solids-laden liquids and slurries. Performance will vary with pump speed, see performance curves. Values given are for maximum at 1750RPM.

The combination of different sized pumps, impeller trims and speed variations ensure that the correct capacity pump will be matched to the exact requirements of your system, whether it's a small sub-division or a large waste collection system. These pumps feature a large volute design that allows them to reprime automatically in a completely open system without the need for suction or discharge check valves - and they can do it with the pump casing only partially filled with liquid and a completely dry suction line.

  • Spherical solids handling: 3"
  • Self priming
  • 2 vane open ductile iron impeller
  • Replaceable wear plate
  • Back pull-out
  • Removable Cover plate
  • Silicon Carbide Seals
  • 4140 SS shaft, Shaft sleeve 316SS
  • SAE and frame mount available
Base plates, motors and coupling guards are all available as options. See performance chart for flow and head at various RPM and impeller diameters.
More Information
Model Number SH8-U
part number 62040204
Series Barmesa Industrial Pumps
Max Flow (GPM.) 2600
Max Flow GPH 156000
TDH Maximum (Ft) 120
TDH Maximum (PSI) 52
HP Required 75
Inlet Connection Type Flange
inlet size 8"
Inlet (In.) 8
Outlet Connection Type Flange
Outlet (In.) 8
Wetted Materials 316SS, Cast Iron, Steel
Elastomers / O-ring Buna-Nitrile
Speed (RPM.) variable
Self Priming Yes
Suction Lift (FT.) 20
Max Operating Temperature (F) 160
Viscosity Vegetable Oil 34.60 cp 200.00 ssu
Shaft 316SS
Mechanical Seal TYPE 21, OIL LUBRICATED
Mechanical Seal Face SiC
Mechanical Seal Type Double
Impeller Size (IN.) 14.25
Other See performance chart for flow and head at various RPM and impeller trims.
Rotation CW Facing rear of pump
Impeller Material 2 Vane open type. Ductil Iron
Drain Yes
Port Rotation No
Country of Manufacture Mexico
Weight (Lbs) 1600.000000
Warranty (YRS.) 1
GPM Of Water At 70 Feet Of Head 2350
GPM Of Water At 80 Feet Of Head 2000
GPM Of Water At 100 Feet Of Head 1400

Supporting Docs

Supporting Docs
(Size: 1.99 MB) Extension: pdf
Barmesa Pumps LLC started operations in 1953, manufacturing small self-primer pumps, jet pumps and end suction centrifugal pumps for the rural market.

During the 1970's, new additions were made to the line of products and we started manufacturing submersible solids handling pumps as well as grinder pumps.

Today after more than 60 years, we have manufacturing facilities & distribution centers across America, and an extensive distributor network. Our State of the Art manufacturing facilities have modern CNC machinery as well sophisticated design and test capabilities. Barmesa serves markets such as marine, commercial, municipal, wastewater, water, industrial, construction, utility, chemical, OEM, irrigation, dewatering flood control, fire protection, as well as many other applications.

Our privately held family business is committed to offer an extensive variety of products with the best quality standards and on-time deliveries. We are proud to say "Quality Pumps Since 1953".