My Cart

6" Self Priming trash pump

Frame Mount 6"
Model Number
SH6-U
$10,135.00
trash solids handling pump 6" SH6-U Barmesa

6" Self priming trash solids handling pump, PTO

Frame mounted trash pump designed for Municipal and Industrial applications. For economical, trouble-free operation in handling solids-laden liquids and slurries. Performance will vary with pump speed, see performance curves. Values given are for maximum at 1750RPM. Frame mounted for customer PTO drive.

The combination of different sized pumps, impeller trims and speed variations ensure that the correct capacity pump will be matched to the exact requirements of your system, whether it's a small sub-division or a large waste collection system. These pumps feature a large volute design that allows them to reprime automatically in a completely open system without the need for suction or discharge check valves - and they can do it with the pump casing only partially filled with liquid and a completely dry suction line.

  • Self priming
  • Semi-open ductile iron impeller
  • Replaceable wear plate
  • Back pull-out
  • Removable Cover plate
  • Silicon Carbide Seals
  • 4140 SS shaft
  • SAE and frame mount available

Base plates, motors and coupling guards are all available as options. See performance chart for flow and head at various RPM and impeller diameters.

More Information
Model Number SH6-U
part number 62040203
Series Barmesa Industrial Pumps
Max Flow (GPM.) 1500
Max Flow GPH 90000
TDH Maximum (Ft) 120
HP Required 40
Inlet Connection Type Flange
inlet size 6"
Inlet (In.) 6
Outlet Connection Type Flange
Outlet (In.) 6
Wetted Materials 316SS, Cast Iron, Steel
Elastomers / O-ring Buna-Nitrile
Motor PTO
Speed (RPM.) variable
Self Priming Yes
Suction Lift (FT.) 25
Max Operating Temperature (F) 160
Viscosity Vegetable Oil 34.60 cp 200.00 ssu
Shaft 316SS
Mechanical Seal TYPE 21, OIL LUBRICATED
Mechanical Seal Face SiC
Mechanical Seal Type Double
Impeller Size (IN.) 11.500000
Other See performance chart for flow and head at various RPM and impeller diameters.
Rotation CW facing rear of pump
Impeller Material 2 Vane open type. Ductil Iron
Drain Yes
Port Rotation No
Country of Manufacture Mexico
Weight (Lbs) 928.000000
Warranty (YRS.) 1
GPM Of Water At 70 Feet Of Head 1250
GPM Of Water At 80 Feet Of Head 1050
GPM Of Water At 90 Feet Of Head 900

Supporting Docs

Supporting Docs
pdf
(Size: 1.99 MB) Extension: pdf
Barmesa Pumps LLC started operations in 1953, manufacturing small self-primer pumps, jet pumps and end suction centrifugal pumps for the rural market.

During the 1970's, new additions were made to the line of products and we started manufacturing submersible solids handling pumps as well as grinder pumps.

Today after more than 60 years, we have manufacturing facilities & distribution centers across America, and an extensive distributor network. Our State of the Art manufacturing facilities have modern CNC machinery as well sophisticated design and test capabilities. Barmesa serves markets such as marine, commercial, municipal, wastewater, water, industrial, construction, utility, chemical, OEM, irrigation, dewatering flood control, fire protection, as well as many other applications.

Our privately held family business is committed to offer an extensive variety of products with the best quality standards and on-time deliveries. We are proud to say "Quality Pumps Since 1953".