MY CART 0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
Jabsco - 30520 SS 2004 Pumphead: 30520 SS Pump Flex Impeller 22gpm
Jabsco - 30520 SS 2004 Pumphead: 30520 SS Pump Flex Impeller 22gpm 30520 SS 2004 Pumphead 30520 SS 2004 Pumphead 30520 SS 2004 Pumphead

Scroll Down For Product Details

Manufacturer: Jabsco

30520 SS Pump Flex Impeller 22gpm

Product Name:

30520 SS 2004 Pumphead

Model Number:




Use where single or variable speed operation and 316 Stainless Steel material is desirable. Self-priming, 22 gpm flow, and debris tolerant. Nitrile impeller is ideal for oil based products. Use Neoprene for water and general purpose pumping. Use Viton for hydrocarbons and most solvents. Optional EPDM impeller kit 8981-0002 for hygienic applications and some keytone solvents. Use Tungsten Carbide seal when pumping highly corrosive or abrasive fluids. Long lasting AC induction motor has no brushes to wear out. Do not pump gasoline or other flammable liquids. Motor is not explosion proof. DO NOT RUN DRY.

For pumphead only models (30520-2xxx) select NEMA H145TC Frame C-Face motor rated at 1.5 HP at 1750 RPM with appropriate service factor. Motor must handle high axial loads. Front ball bearing locked against axial movement is recommended. Motor must deliver 4.8 ft-lbs and 11.2 ft-lbs torque minimum in forward and reverse directions respectively. Use only capacitor start motors.

For pedestal mount models (30520-0xxx) operating at 1750 RPM, select 1.5 HP or 3 HP motor for standard or high pressure impellers respectively, with an appropriate service factor. For high pressure impellers, the motor must supply 7.9 ft-lbs or 16.3 ft-lbs. of torque minimum for forward and reverse operation respectively.

Additional Information

Model Number 30520-2004
Series 30520 SS Pump Flex Impeller 22gpm
Max Flow (GPM.) 22
TDH Maximum (Ft) 70
TDH Maximum (PSI) 30.3
HP Required 1.5
Horsepower 1.5
Inlet Connection Type FNPT
Inlet (In.) 1
Outlet Connection Type FNPT
Outlet (In.) 1
Wetted Materials 316SS
Elastomers / O-ring Viton
Voltage (V) 115/230
Phase (Ø) 1
Motor Frequency 60
Motor TEFC
Speed (RPM.) 1725
Motor Frame 56
Self Priming Yes
Max Operating Temperature (F) 180
Viscosity SAE 30 oil 352.00 cp 2000.00 ssu
Shaft 316SS
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Coupling Y
Applications Contractor, Coolant, Portable, Self-Priming
Other Rated flow is based on Neoprene impeller pumping water. Reduce rated flow 10% for Nitrile, Viton and EPDM standard impellers. Reduce rated flow 15% for Nitrile, Viton and EPDM high pressure impellers.
Drain Yes
Port Rotation Yes
Weight (Lbs) 11
Time to Ship (DAYS) 2-3 days

Supporting Docs

30510 SS 4001 3/4HP30510 SS 4001 3/4HP Size: (96.03 KB) Extension: jpg
30520 SS 4001 1.5HP30520 SS 4001 1.5HP Size: (54.44 KB) Extension: jpg