Vertical SS Centrifugal Pump

Agitator pumps are designed for use with liquids containing solids which must be kept in suspension or require constant circulation to maintain uniform viscosity. A port in the pump volute bypasses a jet stream of fluid to “stir” tank contents. A port plug is furnished so that the bypass can be eliminated when tank agitation is not desired.

Available in both closed column (HRTG model) and easy-to-clean TRI-Rod design. In order to extend motor life, rod style pumps are equipped with a vapor diffuser which prevents solvent vapors from diluting the motor bearing grease. These pumps are also available as part of a pump and round tank system with 2 gallon (HRTG only), 10, 20, or 30 gallon capacities.

HRTG Specifications: 1/8 HP, 1725 RPM, ½” NPT horizontal discharge. Maximum viscosity: 500 SSU. TNRT 30 Specifications: ¼ or ½ HP, 1725 RPM, ¾” NPT vertical discharge. Maximum viscosity: 500 SSU.TRNT 30H Specification: ½, ¾, 1, 1-1/2 HP, 3450 RPM, 1” NPT vertical discharge. Maximum viscosity: 500 SSU.TNRT 40 Specification: ½ HP, 1725 RPM, 1” NPT vertical discharge. Maximum viscosity: 500 SSU.TNRT 40H Specifications: 2HP, 3450 RPM, 1-1/4” NPT vertical discharge. Maximum viscosity: 500 SSU.

Note: Information about the flow curves: 1. TNRT40H 2 HP water2. TNRT40H 2 HP 300 SSU oil3. TNRT30H/TNRSS30H 1-1/2 HP Water4. TNRT30H/TNRSS30H 1-1/2 HP 300 SSU oil5. TNRT30H/TNRSS30H 1HP water6. TNRT30H/TNRSS30H 1HP 300 SSU oil7. TNRT30H/TNRSS30H ¾ HP water8. TNRT30H/TNRSS30H ¾ HP 300 SSU oil9. TNRT30H/TNRSS30H ½ HP water10. TNRT30H/TNRSS30H ½ HP 300 SSU oil11. TNRT40 ½ HP water12. TNRT40 ½ HP 300 SSU oil13. TNRT30/TNRSS30 ¼ & ½ HP water14. TNRT30/TNRSS30 ¼ & ½ HP 300 SSU oil

ADVANTAGES to the Agitator Series:

• Designed for use with liquids containing solids which must be kept in suspension or require constant circulation to maintain uniform viscosity
• A port in the pump volute bypasses a jet stream of fluid to "stir" tank contents
• Port plug is furnished so that the bypass can be eliminated when tank agitation is not desired
• Closed column HRTG Model
• Easy to clean Tri-Rod design TNR Models
• Rod style pumps are equipped with a vapor diffuser which prevents vapors from diluting motor bearing grease
• Thin to heavy viscosities – liquids containing abrasives and solids
• Virtually maintenance-free
• No bearings or seals in the liquid except for 36" nominal lengths
• High speed "H" models provide the highest head pressures
• Can be combined with tanks to provide a complete, ready-to-install pumping system