My Cart

SS pump & motor

1 1/2HP 230/460V TEFC
Model Number
C14325BET3-SS
$1,901.50
American Stainless C14325BET3-SS SS pump  motor

American Stainless C14325BET3-SS

Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps do not have a volute design casing, which can put a radial load on the motor bearing; and no diffuser to plug up, wear out, or replace. The SSP is an open impeller pump while the SSPC is a closed impeller pump, which will have a higher efficiency & pressure capability.

Washguard® Motor:

  • All Stainless Steel motor
  • IEEE 841 severe-duty features
  • Stainless steel shaft, conduit box cover, nameplate, fan guard
  • Special gaskets, slingers and seals
  • Sealed ball bearings
  • Moisture-resistant interior components
 
More Information
Model Number C14325BET3-SS
Series SSPC Centrifugal Pumps Stainless Steel
Max Flow (GPM.) 70
Max Flow GPH 4200
TDH Maximum (Ft) 75
TDH Maximum (PSI) 32
TDH BEP (FT.) 65.000000
Horse Power (HP) 1 1/2
Horsepower (IE .5, 1, 1.5, 20) 1.5000
Inlet Connection Type FNPT
inlet size 1 ¼"
Inlet (In.) 1.25
Outlet Connection Type FNPT
Outlet (In.) 1
Wetted Materials 304SS
Elastomers / O-ring Buna-Nitrile
Voltage (V) 230/460
Voltage (Range) 220-240/460-480
Phase (Ø) Three (3)
Motor Frequency 60
Motor TEFC
Speed (RPM.) 3450
Motor Frame 56C
Self Priming No
Max Operating Temperature (F) 220
Viscosity Vegetable Oil 34.60 cp 200.00 ssu
Shaft 304SS
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Impeller Size (IN.) 4.380000
Other Dishwashing Machines, Commerical Laundry, Chillers, Mold Cooling, Water Circulation
Drain Yes
Port Rotation Yes
Weight (Lbs) 37.000000
>