12 Volt DC Washdown Pump 12v
Product Name:12 Volt DC Washdown Pump 12v
12 Volt DC Washdown pumps
Obsolete see new model to right. 12vdc are designed for OEM, Septic Service, Pumper and Marine applications requiring a DC motor. Wash-down pumps is specifically designed for filling sinks and toilets. The motor has a one hour duty rating and is furnished with a grade 303 stainless steel shaft. This wash-down duty pump is available in a variety of construction and seal materials to meet your specifications. Pull-from-the-rear design for easy servicing without disturbing any piping. High efficiency impeller maximizes performance. Other DC Battery powered pumps.
Uses such as snow melt liquid deicer deicing: Potassium Acetate, Sodium Formate, 32% Calcium Chloride, FAA Compliant Ice Melters, Peladow®, LS25, LS-25 CI, and a variety of Environmentally Friendly products SnowMelt. Prewetting / anti-icing, salt pre-wetting systems, salt brine, calcium & Mag chloride, potassium acetate. For use with non-flammable liquids compatible with pump component materials.
- Cast Iron with Stainless Steel Impeller (unlike Burks DC-10 which has a Noryl plastic impeller). All SS model 489G-98
- 50 minute duty cycle max.
- Discharge Port Rotates in 90° Increments
- Four Front Drain Plugs
- Max. Working Pressure 150 PSI
- Max. Temperature 180° F
- Max. Flow 56 GPM
- Max. Head 80 Ft. (35 PSI)
- High Efficiency Closed Impeller
- 1 HP 12 Volt DC Washdown Duty Motor for Severe Operating Conditions
- 50 minute duty cycle max.
Commonly used on sanitary portable toilet pumper service trucks or booster to jetter. Replace DC-10 or DC10-SSI
|Series||12 volt DC Washdown High Pressure pumps|
|Max Flow (GPM.)||42|
|Max Flow GPH||2520|
|TDH Maximum (Ft)||76|
|TDH Maximum (PSI)||33|
|Horse Power (HP)||1|
|Horsepower (IE .5, 1, 1.5, 20)||1.0000|
|Inlet Connection Type||FNPT|
|inlet size||1 ¼"|
|Outlet Connection Type||FNPT|
|Wetted Materials||316SS, Cast Iron|
|Elastomers / O-ring||Buna-Nitrile|
|Voltage (Range)||12/24/36 VDC|
|Motor Amps (A)||83|
|Motor Frame||56J thrd|
|Max Operating Temperature (F)||180|
|Viscosity||Milk 3.20 cp 40.00 ssu|
|Mechanical Seal Face||Carbon-ceramic|
|Mechanical Seal Type||Single|
|Impeller Number (In.)||A|
|Other||Due to new DOE efficiency standards effective 2/2020 the 489g-98 pump has been slightly modified to reduce flow and thus required power to 7/8HP in order to avoid the DOT law. New model is 12DC-95|
|Impeller Material||SS, closed|
|Country of Manufacture||United States|
|GPM Of Water At 20 Feet Of Head||52|
|GPM Of Water At 40 Feet Of Head||40|
|GPM Of Water At 60 Feet Of Head||25|
AMT Pump Company is A Subsidiary of The Gorman-Rupp Company located in Mansfield, Ohio. AMT offers over 1000+ different standard model numbers of which 400+ are readily available and offered as QSP, Quick Ship Products. AMT manufactures and sells Industrial / Commercial pumps & accessories through authorized distributors.
Virtually every product AMT sells is engineered and designed by the company. Pump components are machined, assembled and tested at the Royersford, Pennsylvania facility.
AMT’s unique designs and patented products have made the company the industry leader for their high quality pumps.