SS 12V DC High Pressure Washdown pump
Series (3 Models):
Product Name:SS 12V DC High Pressure Washdown pump
Stainless Steel 12 Volt DC Washdown pumps
12v are 316 Stainless, designed Septic Service, Pumper and Marine applications requiring a DC motor. High pressure pump. The motor has a one hour duty rating and is furnished with a grade 303 stainless steel shaft. This wash-down duty pump is available in a variety of construction and seal materials to meet your specifications. Pull-from-the-rear design for easy servicing without disturbing any piping. High efficiency impeller maximizes performance. Replaces 489g-98. Other DC Battery powered pumps.
Uses such as snow melt liquid deicer deicing: Potassium Acetate, Sodium Formate, 32% Calcium Chloride, FAA Compliant Ice Melters, Peladow, LS25, LS-25 CI, and a variety of Environmentally Friendly products SnowMelt. Prewetting / anti-icing, salt pre-wetting systems, salt brine, calcium & Mag chloride, potassium acetate. For use with non-flammable liquids compatible with pump component materials.
- Investment Cast 316 Stainless Steel, Cast Bronze and Cast Iron with Stainless Steel Impeller Construction Vitonï½® Mechanical Seal and O-Ring with Stainless Steel and Bronze Models
- Viton Mechanical Seal and O-Ring
- Discharge Port Rotates in 90 Increments
- Four Front Drain Plugs
- Max. Working Pressure 150 PSI
- Max. Temperature 200ï½° F
- Max. Flow 56 GPM Out performs Burk DC-10
- Max. Head 80 Ft. (35 PSI)
- High Efficiency Closed Impeller
- 7/8 HP 12 Volt DC Washdown Duty Motor for Severe Operating Conditions
- 50 minute duty cycle max.
commonly used on sanitary portable toilet service trucks
|Series||12 volt DC Washdown High Pressure pumps|
|Max Flow (GPM.)||55|
|Max Flow GPH||3300|
|TDH Maximum (Ft)||80|
|TDH Maximum (PSI)||35|
|Horse Power (HP)||1|
|Horsepower (IE .5, 1, 1.5, 20)||1|
|Inlet Connection Type||FNPT|
|Outlet Connection Type||FNPT|
|Elastomers / O-ring||Viton|
|Voltage (Range)||12/24/36 VDC|
|Motor Amps (A)||75|
|Motor Frame||56J thrd|
|Max Operating Temperature (F)||200|
|Viscosity||Milk 3.20 cp 40.00 ssu|
|Mechanical Seal Face||Carbon-ceramic|
|Mechanical Seal Type||Single|
|Other||Due to new DOE efficiency standards effective 2/2020 the 489g-98 pump has been slightly modified to reduce flow and thus required power to 7/8HP in order to avoid the DOT law.|
|Cord Length (Ft.)||0|
|Country of Manufacture||United States|
|GPM Of Water At 20 Feet Of Head||52|
|GPM Of Water At 40 Feet Of Head||40|
|GPM Of Water At 60 Feet Of Head||25|
AMT Pump Company is A Subsidiary of The Gorman-Rupp Company located in Mansfield, Ohio. AMT offers over 1000+ different standard model numbers of which 400+ are readily available and offered as QSP, Quick Ship Products. AMT manufactures and sells Industrial / Commercial pumps & accessories through authorized distributors.
Virtually every product AMT sells is engineered and designed by the company. Pump components are machined, assembled and tested at the Royersford, Pennsylvania facility.
AMT’s unique designs and patented products have made the company the industry leader for their high quality pumps.