My Cart

12 Volt DC Washdown Pump 12v

12vdc Cast Iron
Model Number
AMT - 489G-95 12dc-95 12 Volt DC Washdown Pump

AMT 12DC-95

12 Volt DC Washdown pumps

Obsolete see new model to right. 12vdc are designed for OEM, Septic Service, Pumper and Marine applications requiring a DC motor. Wash-down pumps is specifically designed for filling sinks and toilets. The motor has a one hour duty rating and is furnished with a grade 303 stainless steel shaft. This wash-down duty pump is available in a variety of construction and seal materials to meet your specifications. Pull-from-the-rear design for easy servicing without disturbing any piping. High efficiency impeller maximizes performance. Other DC Battery powered pumps.

Uses such as snow melt liquid deicer deicing: Potassium Acetate, Sodium Formate, 32% Calcium Chloride, FAA Compliant Ice Melters, Peladow®, LS25, LS-25 CI, and a variety of Environmentally Friendly products SnowMelt. Prewetting / anti-icing, salt pre-wetting systems, salt brine, calcium & Mag chloride, potassium acetate. For use with non-flammable liquids compatible with pump component materials.

  • Cast Iron with Stainless Steel Impeller (unlike Burks DC-10 which has a Noryl plastic impeller). All SS model 489G-98
  • 50 minute duty cycle max.
  • Discharge Port Rotates in 90° Increments
  • Four Front Drain Plugs
  • Max. Working Pressure 150 PSI
  • Max. Temperature 180° F
  • Max. Flow 56 GPM
  • Max. Head 80 Ft. (35 PSI)
  • High Efficiency Closed Impeller
  • 7/8 HP 12 Volt DC Washdown Duty Motor for Severe Operating Conditions
  • 50 minute duty cycle max.

Commonly used on sanitary portable toilet pumper service trucks or booster to jetter. Replace DC-10 or DC10-SSI

Series: 12V Washdown Pumps
More Information
Model Number 12DC-95
part number 12DC-999-95
Series 12 volt DC Washdown High Pressure pumps
Max Flow (GPM.) 42
Max Flow GPH 2520
TDH Maximum (Ft) 76
TDH Maximum (PSI) 33
Horse Power (HP) 1
HP Required 7/8
Horsepower (IE .5, 1, 1.5, 20) 1.0000
Inlet Connection Type FNPT
Inlet (In.) 1.25
Outlet Connection Type FNPT
Outlet (In.) 1
Wetted Materials 316SS, Cast Iron
Elastomers / O-ring Buna-Nitrile
Voltage (V) 12DC
Voltage (Range) 12/24/36 VDC
Motor Frequency NA
Motor Amps (A) 83
Motor TENV
Speed (RPM.) 3450
Motor Frame 56J thrd
Self Priming No
Max Operating Temperature (F) 180
Viscosity Milk 3.20 cp 40.00 ssu
Shaft 416SS
Length (In.) 15.2000
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Motor Bearings Ball
Impeller Number (In.) A
Other Due to new DOE efficiency standards effective 2/2020 the 489g-95 pump has been slightly modified to reduce flow and thus required power to 7/8HP in order to avoid the DOT law.
Impeller Material SS, closed
Duty Continuous
Drain Yes
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 52.000000
Warranty (YRS.) 1
GPM Of Water At 20 Feet Of Head 52
GPM Of Water At 40 Feet Of Head 40
GPM Of Water At 60 Feet Of Head 25

AMT Pump Company is A Subsidiary of The Gorman-Rupp Company located in Mansfield, Ohio. AMT offers over 1000+ different standard model numbers of which 400+ are readily available and offered as QSP, Quick Ship Products. AMT manufactures and sells Industrial / Commercial pumps & accessories through authorized distributors.

Virtually every product AMT sells is engineered and designed by the company. Pump components are machined, assembled and tested at the Royersford, Pennsylvania facility.

AMT’s unique designs and patented products have made the company the industry leader for their high quality pumps.